- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Analog/Digital Megger Insulation Tester; 250, 500 & 1000V.
Analog/Digital Megger Insulation Tester; 250, 500 & 1000V.
Designed with the needs of today’s electrical contractors and using considerable customer research, this tester is outfitted with a durable rubber case and protective cover. In the event of accidental misuse, this tester has a broad set of features developed to protect user safety, including a live circuit warning.
Features
Tough
Simple to use
Hands free use
Safety features
To protect the user and the tester from incorrect use, the insulation and continuity tester features an extensive range of features. including:
Applications
| Insulation | Nominal test voltage: 1000, 500, 250 V (DC) |
| Measuring Range | 10 kΩ to 999 MΩ on all ranges Short circuit current: 1.5 mA nominal Test current on load: 1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364) Accuracy at 68°F (20°C): ±3%, ±2 digits up to 10 MΩ, ±5% up to 100 MΩ, ±30% up to full scale |
| Continuity | Measuring range: 0.01 to 99.9 Ω (0 to 50 Ω on) analogue scale) Open circuit voltage: 5 V ±1 V Short circuit current: 205 mA +10 mA –5 mA Accuracy at 68°F (20°C): ±3% ±2 digits Measuring range: 0 to 2/20/200/2 kΩ Open circuit voltage: 1.5 V ±0.5 V Zero offset adjust: 0 to 9 Ω |
| Resistance | Measuring range: 10 Ω to 1 MΩ Open circuit voltage: 5 V Short circuit current: 1.5 mA Accuracy at 68°F(20°C): ±5% ±2 digits up to 100 kΩ |
| Voltage | Measuring range: 0 to 600 V AC (50/60 Hz) or DC Accuracy at 68°F (20°C): DC or AC (50/60 Hz): ±1%, ±2 digits Temperature coefficient: <0.1% per °C on all ranges |
| Continuity Buzzer | Adjustable at 1 to 20 Ω Response time <20 ms |
| Default Voltmeter | >25 V AC or DC is applied display will operate as a voltmeter |
| AutoPower Down | Operates after 10 minutes if left in standby mode |
| Temperature and Humidity | Operating range: 14 to 140°F (-10 to 60°C) Operating humidity: 93% RH at 104°F (40°C) maximum Storage range: -13 to 158°F (-25 to 70°C) |
| Test Result Storage (1000 results) | Job number: 255 locations Distribution board no: 99 locations Circuits: 99 locations Phases: P1, P2, P3 |
| Communications | USB interface |
| Environmental Protection | IP54 |
| Fuses | Terminals: 500 mA (F) 600 V, 1.25 x 0.23" (32 x 6 mm) Ceramic HBC 10 kA minimum |
| Safety | Meets the requirements of IEC61010-1 Cat III 600 V phase to earth |
| Automatic Discharge | After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored |
| Power Supply | Type: 8 x 1.5 V cells IEC LR6 type (AA alkaline) Battery life: 1000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries |
| E.M.C. | In accordance with IEC61326-1 |
| Dimensions | 8 x 5.7 x 3.2" (203 x 148 x 78 mm) |
| Weight | 34.56 oz (980 g) |
| Insulation | Nominal test voltage: 1000, 500, 250 V (DC) |
| Measuring Range | 10 kΩ to 999 MΩ on all ranges Short circuit current: 1.5 mA nominal Test current on load: 1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364) Accuracy at 68°F (20°C): ±3%, ±2 digits up to 10 MΩ, ±5% up to 100 MΩ, ±30% up to full scale |
| Continuity | Measuring range: 0.01 to 99.9 Ω (0 to 50 Ω on) analogue scale) Open circuit voltage: 5 V ±1 V Short circuit current: 205 mA +10 mA –5 mA Accuracy at 68°F (20°C): ±3% ±2 digits Measuring range: 0 to 2/20/200/2 kΩ Open circuit voltage: 1.5 V ±0.5 V Zero offset adjust: 0 to 9 Ω |
| Resistance | Measuring range: 10 Ω to 1 MΩ Open circuit voltage: 5 V Short circuit current: 1.5 mA Accuracy at 68°F(20°C): ±5% ±2 digits up to 100 kΩ |
| Voltage | Measuring range: 0 to 600 V AC (50/60 Hz) or DC Accuracy at 68°F (20°C): DC or AC (50/60 Hz): ±1%, ±2 digits Temperature coefficient: <0.1% per °C on all ranges |
| Continuity Buzzer | Adjustable at 1 to 20 Ω Response time <20 ms |
| Default Voltmeter | >25 V AC or DC is applied display will operate as a voltmeter |
| AutoPower Down | Operates after 10 minutes if left in standby mode |
| Temperature and Humidity | Operating range: 14 to 140°F (-10 to 60°C) Operating humidity: 93% RH at 104°F (40°C) maximum Storage range: -13 to 158°F (-25 to 70°C) |
| Test Result Storage (1000 results) | Job number: 255 locations Distribution board no: 99 locations Circuits: 99 locations Phases: P1, P2, P3 |
| Communications | USB interface |
| Environmental Protection | IP54 |
| Fuses | Terminals: 500 mA (F) 600 V, 1.25 x 0.23" (32 x 6 mm) Ceramic HBC 10 kA minimum |
| Safety | Meets the requirements of IEC61010-1 Cat III 600 V phase to earth |
| Automatic Discharge | After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored |
| Power Supply | Type: 8 x 1.5 V cells IEC LR6 type (AA alkaline) Battery life: 1000 consecutive tests (5 seconds per test) on any test using 2 Ah batteries |
| E.M.C. | In accordance with IEC61326-1 |
| Dimensions | 8 x 5.7 x 3.2" (203 x 148 x 78 mm) |
| Weight | 34.56 oz (980 g) |
