Hioki 3284 Clamp On AC/DC HiTester

Downloads: datasheet manual

Featuring a 20/200A AC/DC clamp meter with analog output and peak hold for inrush measurement applications.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Model: CM4371-90

Use this clamp meter to measure the AC/DC current of wires and devices. The versatile tool can measure voltage, amperage, resistance and frequency.

Learn More

Features

Analog output for current measuring level, current measuring waveform, or frequency measuring level
Peak hold function displays the crest value of the inrush current occurring when electrical equipment starts
AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms

DC Current	20/200 A Basic accuracy: ±1.3% rdg. ±3 dgt.
AC Current	20/200 A (10 Hz to 2 kHz, True RMS) Basic accuracy 45 to 66 Hz: ±1.3% rdg. ±3 dgt.
DC Voltage	30 to 600 V, 3 ranges Basic accuracy: ±1.0% rdg. ±3 dgt.
AC Voltage	30 to 600 V, 3 ranges (10 to 1 kHz, True RMS) Basic accuracy 45 to 66 Hz: ±1.0% rdg. ±3 dgt.
Sampling Rate	2 or 4 times/sec (Slow: 1 time/3 sec)
Crest Factor	2.5 or less (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog Output	DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz bandwidth (±3dB)
Frequency	1 to 1000 Hz Basic accuracy: ±0.3% rdg. ±1 dgt.
Functions	AC+DC mode, Maximum/Minimum/Average value record function, Data hold, Peak hold, Auto power off, Auto zero
Display	Display refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph)
Power Supply	1 x 6F22 (Stacked manganese battery), Continuous use: 25 hours, or AC adapter 9445-02/-03
Measurement Category	CAT III 600V
Core Jaw Diameter	Ø 1.3" (33 mm)
Dimensions	2.44 x 9.06 x 1.54" (62 x 230 x 39 mm)
Weight	16.2 oz (460 g)

datasheet for the Hioki 3284 Clamp On AC/DC HiTester manual for the Hioki 3284 Clamp On AC/DC HiTester

Features

Analog output for current measuring level, current measuring waveform, or frequency measuring level
Peak hold function displays the crest value of the inrush current occurring when electrical equipment starts
AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms

DC Current	20/200 A Basic accuracy: ±1.3% rdg. ±3 dgt.
AC Current	20/200 A (10 Hz to 2 kHz, True RMS) Basic accuracy 45 to 66 Hz: ±1.3% rdg. ±3 dgt.
DC Voltage	30 to 600 V, 3 ranges Basic accuracy: ±1.0% rdg. ±3 dgt.
AC Voltage	30 to 600 V, 3 ranges (10 to 1 kHz, True RMS) Basic accuracy 45 to 66 Hz: ±1.0% rdg. ±3 dgt.
Sampling Rate	2 or 4 times/sec (Slow: 1 time/3 sec)
Crest Factor	2.5 or less (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog Output	DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz bandwidth (±3dB)
Frequency	1 to 1000 Hz Basic accuracy: ±0.3% rdg. ±1 dgt.
Functions	AC+DC mode, Maximum/Minimum/Average value record function, Data hold, Peak hold, Auto power off, Auto zero
Display	Display refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph)
Power Supply	1 x 6F22 (Stacked manganese battery), Continuous use: 25 hours, or AC adapter 9445-02/-03
Measurement Category	CAT III 600V
Core Jaw Diameter	Ø 1.3" (33 mm)
Dimensions	2.44 x 9.06 x 1.54" (62 x 230 x 39 mm)
Weight	16.2 oz (460 g)