DSA602A Features include:

• 2 GS/s Sample Rate
• 8-Bit Vertical Resolution
• 1 GHz System Bandwidth
• 24 waveform functions, 24 automatic measurements
• Up to 4 channels of concurrent single-shot capability
• 3.5" floppy, Centronics, RS-232 and GPIB interfaces
• Time, Event, Level, and Boolean Qualified Triggering
• **This unit includes Plug-In 11A34 (300MHz, 4 Channel Amplifier)

Delta DC Volt Accuracy: Vertical Resolution: 8-Bits. Resolution can be increased to 14-Bits with signal averaging or smoothing.

Bandwidth: To 1 GHz. Determined by the plug-in used.

Wide Dynamic Range: 1 mV/div to 10 V/div.

DSA602A Horizontal System
Time Bases (Main and Window) Sweep Speeds: 50 ps/div to 100 s/div.

Record Duration: 512 ps to 1024 s in 1-2-5 sequence.

Time Base Accuracy: +0.005%: -0.015%: 0 to 45 degree C.
±0.005%: 20 to 30 degree C.

Record Length: 512 to 32,768 pts (both single-shot and repetitive).

Sampling Rate: 2 GS/s max.

Main Record Positioning: The main record is positioned with respect to the main trigger point. At maximum pretrigger, all points except the last point in the main record precede the trigger point. At maximum post trigger, all points except the first point in the main record follow the trigger point.

Window Time Base: The main record plus two window records may be acquired and displayed. The window records may be different lengths and can have a different time/div than the main record.

Window Record Positioning: The window records may be positioned with respect to their own trigger points on the main record. Window triggers may be delayed from the main trigger by time or events.

Multi-trace Pan and Zoom: Multiple traces may be panned and zoomed simultaneously.

Display Interpolation: Zoomed waveforms can be displayed using either sin (x)/x or linear interpolation, or using a dots-only display without any interpolation.

Waveform Memory: More than 210 K points of volatile memory shared between acquired and stored waveforms.

Settings Memory: Non-volatile memory for approximately five settings.

DSA602A Triggering System
Range: ±Full Screen.

Bandwidth: 1 GHz max: 500 MHz for extended triggering.

Coupling and Sensitivity: DC Coupled: 0.4 div from DC to 10 MHz, increasing to 1 div at maximum trigger bandwidth.

DC Noise Reject Coupled: 1.2 divs from DC to 10 MHz, increasing to 3 divs at maximum trigger bandwidth.

DC HF Reject Coupled: 0.5 divs from DC to 30 kHz.

AC Coupled: 0.4 div from 60 Hz to 10 MHz, increasing to 1 div at maximum trigger bandwidth.

AC Noise Reject Coupled: 1.2 divs from 60 Hz to 10 MHz, increasing to 3 divs at max trigger bandwidth.

AC HF Reject Coupled: 0.5 div from 60 Hz to 30 kHz.

AC LF Reject Coupled: 0.5 div from 80 kHz to 10 MHz, increasing to 1 div at max trigger bandwidth.

Holdoff Range: Main Record Min: 2 µs or less; max: 500 s. Window Record Min: 35 ns; max: 1000 s.

DSA602A Waveform Processing
Waveform Functions: Absolute value, average (exponential and summation), convolution, correlation, delay, dejitter, differentiate, envelope, exponential, FFT filter, FFT integrate, interpolate, logarithm, natural log, pulse, signum, smooth, and square root. Live waveforms can be changed by using adjustable parameters.

Arithmetic Operators: Add, subtract, multiply and divide.

FFT: Magnitude and phase; real and imaginary; inverse FFT, correlation, and convolution; six window functions; Typical Noise Floor: -60 dB; -70 dB with averaging.

Act on Delta: Save, repeat, chime, SRQ, and hardcopy.

Histograms: Vertical or horizontal histograms generated from a user-defined portion of any waveform. Statistical information is provided for histogram data.

DSA602A Measurement System
Amplitude: Min, max, mid, mean, p-p, gain, RMS, overshoot, undershoot, area +, area -, and energy.

Timing: Rise, fall, width, delay, main-to-window trigger time, period, propagation delay, cross, phase, frequency, duty cycle, and skew.

FFT: Fundamental track, harmonic amplitude, frequency, and total harmonic distortion.

Statistics: Available for any measurement listed above for both live acquisitions and groups of stored waveforms.

Cursors: Single or dual dots, split or paired mode, horizontal and vertical bars, and measurement-zone delimiters. Delta volts, delta time, 1/delta time, and slope.

DSA602A Input/Output System
Ports: Centronics, GPIB, and RS-232-C ports standards. Fully GPIB and RS-232-C programmable.

Data Transfer Rates: Up to 100 waveforms per second. Up to 60 measurements per second.

DSA602A Disk Drive
One 3.5 in. microfloppy disk drive, 1.44 MB or 720 KB formatted capacity, depending on disk used. MS-DOS compatible formatting.

DSA602A CRT And Display Features
CRT: 10 in. diagonal, color, magnetic deflection. Vertical raster-scan orientation.

Resolution: 552 horizontal by 704 vertical displayed pixels.

DSA602A Power Requirements
Line Voltage Ranges: 90 to 132 V RMS; 180 to 250 V RMS.

Line Frequency: 48 to 72 Hz.

Maximum Power Consumption: 585 W max.

DSA602A Environmental And Safety
Temperature (Mainframe):
Operating: 0 to +45 degree C.
Nonoperating: -40 to +75 degree C.

Disk Drive:
Operating: 5 to +45 degree C.
Nonoperating: -22 to +60 degree C.

Humidity (Mainframe):
Operating and Nonoperating: Up to 95% relative humidity; up to +45 degree C.

Disk Drive:
Operating: Up to 80% relative humidity; up to +30 degree C.
Nonoperating: Up to 90% relative humidity; up to +40 degree C.

Altitude, Vibration, Shock, Bench Handling:
Operating and Nonoperating: meets MIL-T-28800C, Type III, Class 5.

Electromagnetic Compatibility: Referenced to MIL-STD-461B. Meets FCC part 15, subpart J, class A. Meets VDE 0871/6.78 for Class "B."

Safety: Listed UL 1244; Certified to CSA C22.2 No. 231-M89.

DSA602A Single-shot Acquisitions
Sample Rate 500 MS/s:
No of channels, 4.
Time resolution, 2 ns.
Record Length, 512 to 10 K pts.

Sample Rate 1 GS/s:
No of channels, 2.
Time resolution, 1 ns.
Record Length, 512 to 20 K pts.

Sample Rate 2 GS/s:
No of channels, 1.
Time resolution, 500 ps.
Record Length, 512 to 32 K pts.