The term Intrinsically Safe (I.S.) and also known as explosion-proof is often used generically to describe products destined for hazardous (explosive) areas. In reality, I.S. is a protection concept based around limiting the available electrical energy to nonincendive levels so that sparks cannot occur from short circuit or failures which could cause an explosive atmosphere to ignite.
Here you'll find an extensive grouping of products that offer you the necessary protection using I.S. standard to keep you and your teams safe for all your applications.
Cementex 30200TW38I Torque Wrench
Meriam MFC5150X HART Communicator Kit - Includes R2050 Thermal Imager for FREE
This product is available in the United States and Canada only.
Cementex 30150TW38I Torque Wrench
Cementex ITS-24BTK Battery Technician Kit
CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres NEMA 7 & 9. Raintight NEMA 3 (IP54). Weatherproof features include a drain plug and O-ring seal in cover. Series offers set points from .03 to 20" w.c. (7.5 to 5 kPa) and from .5 to 60 psi (0.035 to 3.5 bar).
Ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems. Measures positive, negative or differential pressures of air and natural gases in ranges from 1" w.c. (0.249 kPa) to 150 psid (10.34 bar). Approved and is intrinsically safe for hazardous locations.
Compact instrument for air or other low pressure applications. Visible set point and external adjustment add convenience. Used on air, non-corrosive gas or liquid service compatible with wetted parts. Unit also available in weatherproof and explosion-proof housing.
Bacharach Leakator 10 Portable Combustible Gas Leak Detector
Same rugged construction as used in Series 1000W plus explosion-proof design are combined in this unit. UL listed for Class I, Groups A, B, C and D; Class II, Groups E, F and G. Bellville spring movement permits mounting of control in any position and helps prevent contact chatter. Features Visible Setpoint, Fixed Deadband, and Ranges to 1400psi.
UL listed for use in Class I, Groups A, B, C, & D; Class II, Groups E, F, & G and Class III atmospheres, Directive 94/9/EC (ATEX) Compliant for CE ATEX II 2G Exd IIB+H2 T6, CSA & FM approved for Class I, Div. 1, Groups B, C, D; Class II, Div. 1, Groups E, F, G and Class III atmospheres IECEx Ex d IIB+H2 T6 (-40°C < Ta < 60°C).
A low cost, fixed range, stainless steel transmitter with ±0.30% accuracy. It is designed to continuously measure pressure for years in even the toughest environmental and media conditions. Transmitters are explosion-proof, (FM approved) and meet NACE standards for off-shore applications.
Convert pressure into a standard 4-20 mA output signal. It can be used to accurately measure compatible gases and liquids compatible with its 316SS/316LSS wetted parts. Series IS626 full scale accuracy is 0.25%. Designed for industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most effects of shock and vibration.
Provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. Features security level, English or Metric engineering units, pressure, velocity or flow operation, K-factor, volumetric flow operation, plus many more.
A microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration.