The Adalet Wireless DIN rail receiver is an innovative, cost cutting solution for receiving wireless data signals in industrial areas

• Frequency - 902 - 928 MHz, FHSS
• Range - Range Up to 20 miles (using an omni-directional or Yagi antenna with clear line of sight) Range can exceed 20 miles with use of AWX Repeater Up to 3000’ (no line of sight)
• Transmit Power - 1 mW to 1 Watt (adjustable)
• Protocols - ModBus RTU
• Accuracy - 0.2% of full scale (input sensor not included)
• Power Source - 12-32 VDC
• Serial Port - RS-232 DCE via DB9F DF1 (pending) (Configuration and data)
• Operating Temp - -25°C to +85°C
• Dimensions - 1.75” H x 3” W x 4.25”
• Weight - 0.6 lbs.
• Discrete Outputs - Three form ‘C’ relays One opto-isolated transistor output – Can be mapped to any discrete inputs on any transmitters, or programmed for hi/lo alarming or bad signal quality alarming.
• Analog Outputs - One (0-20, 0-24, 4-20mA, 0-5, 1-5, 0-10 VDC) Can be mapped to any analog input on any transmitter.
• Applicable Design Standards -
  • UL Standard 1203
  • CSA Standard C22.2 No. 30
  • NEMA 4X, 7BCD, 9EFG
  • Canada: CSA-E79-0 & CSA-E79-1
• Areas of Use - Industrial or general purpose areas Division 1 classified areas
  • Class I, Division 1, Groups B,C,D
  • Class II, Groups E, F, G
  • Class III
  • NEMA 4X, 7, 9