• View Cart (0)
  • |
  • Quote Cart (0)
  • |
  • Site Map
1-888-610-7664
Go

TPI 621C3 Dual Input Manometer Pressure Kit

TPI 621C3
TPI Store

View TPI Products Visit TPI Store

No Reviews yet for this product

MFG Part # TPI 621C3
Condition New
Our price $259.95

High efficiency gas and oil fired furnaces along with condensing boilers requre a manometer with 0.001 inches of water resolution to make proper adjustments.

Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap.

  • 0.001 inH2O resolution at less than 40 inH2O; 0.01 inH2O resolution over 40 inH2O
  • Enough range and resolution to perform low pressure and draft measurements on high efficiency gas and oil fired equipment.
  • +/- 120 inH2O range, over-pressure protected to 200 inH2O
  • Enough range for low side regulator adjustments and protection against pressure spikes
  • Temperature compensated to ensure repeatable measurements
  • Pressure measurement is not affected by ambient temperature
  • Dual input differential
  • Troubleshoot and setup two stage pressure switches
  • Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg
  • Enables equipment adjustments to be made easily
  • Trim mode to stabilize readings


Applications:

  • Adjust appliance regulators
  • Setting delivery pressures
  • Leakage “shut-in” tests
  • Replace messy U-tube manometers
  • Test low pressure gas systems for leaks
  • Regulator adjustments for pressure and lock-up tests
  • Test pressure switch operation on a 2-stage gas furnace in both positive and negative pressures
  • Measure furnace and boiler draft


Specifications:

  • inH20  ±120
  • mbar     ±300
  • kPa     ±30
  • psi     ±5
  • mmH20     ±3,000
  • mmHg     ±220
  • inHg     ±9
  • Resolution (max)     0.001 inH2O
  • Accuracy     +/-(0.2% of full scale)
  • Over Pressure     200 inH2O
  • Power Supply     9V battery
  • Operating Temp.     32°F to 104°F (0°C to 40°C)
  • Operating Hum.     0% to 80%
  • Storage Temp.     14° F to 122° F (-10°C to 50°C)
  • Auto Off     20 minutes
  • Input Type     Dual / Differential
  • Trim Mode     Yes
  • Auto Zero Button     Yes
  • Min/Max Record     Yes
  • Units of Measure     7 (See range above)
  • Data Hold     Yes
  • Backlight Display     Yes

 

2725-2A Old Wrightsboro Rd. Wilmington, NC 28405 Remit Address: PO Box 602601 Charlotte NC 28260-2601 Copyright 2003-2012 Global Test Supply All rights reserved.