Temperature compensated to ensure repeatable measurements. Over-pressure protected to 120 inH2O.

• +/- 60 inH2O range, 0.01 inH2O resolution
• Enough range and resolution to perform low pressure measurements
• Auto power off after 20 minutes
• Increases battery life by turning off the multimeter when not in use.
• Wall hook and magnets for no-hands use
• Enables equipment adjustments to be made easily
• Four units of measure: inH2O, mbar, KPa, PSI
• Backlight display
• Standard (Included): A009A 9 Volt Alkaline Battery and A774 Silicone tubing

Applications:

• Adjust appliance regulators
• Setting delivery pressures
• Leakage “shut-in” tests
• Replace messy U-tube manometers
• Regulator adjustments for pressure and lock-up tests

Specifications:

• inH20      ±60
• mbar     ±150
• kPa     ±15
• psi     ±2.175
• Resolution (Max)     0.01 inH2O
• Accuracy     +/-1% full scale
• Over Pressure     120 inH2O
• Power Supply     9V battery
• Operating Temp.     32°F to 104°F (0°C to 40°C)
• Operating Hum.     0% to 80%
• Storage Temp.     14° F to 122° F (-10°C to 50°C)
• Auto Off     20 minutes
• Input Type     Single
• Trim Mode     No
• Auto Zero Button     Yes
• Min/Max Record     No
• Units of Measure     4 (See range above)
• Data Hold     No
• Backlight Display     Yes