• View Cart (0)
  • |
  • Quote Cart (0)
  • |
  • Site Map
1-888-610-7664
Go

TPI 275 Digital Clamp-On Meter with high-resolution 11000 count display

TPI 275
TPI Store

View TPI Products Visit TPI Store

No Reviews yet for this product

MFG Part # TPI 275
Condition New
Our price $149.95

The 275 with slim jaw and body is ideal for use in cramped work areas and crowded electrical panels. True RMS responding, the 275 can measure AC/DC amps and capture in-rush current using peak hold mode. The 275 is cULus approved.

  • Measure up to 400A AC/DC
  • Slim jaw and body
  • True RMS responding
  • Safe and easy to use in crowded electrical panels
  • Relative mode
  • Non-contact voltage detection down to 24 V
  • Confirm voltage is present (24VAC or more) without using the test leads.
  • 0.1 millivolt DC resolution
  • Frequency
  • Measure and adjust variable speed drives
  • AC/DC volts up to 600V and AC amps up to 400
  • Enough range to safely perform measurements
  • Temperature function
  • Measure temperature in ducts and rooms
  • Measure temperature differential with relative mode using any K-type sub-mini probe (no adapter required)
  • DC microamps
  • Measure flame safety current
  • Auto power off
  • Increases battery life by turning off the tester when not in use
  • CAT III 600V rated
  • Diode, resistance, and audible continuity
  • 11,000 count display with 41 segment analog bargraph


Applications:

  • Measure flame safety control current
  • Test start and run capacitors & motors
  • Measure motor run current and capture peak motor start up and amperage
  • Measure heat anticipator current
  • Determine thermocouple voltage
  • Test line and control voltage
  • Measure heating element resistance
  • Measure air temperature in ducts
  • Test for the presense of voltage in circuits without contacting the circuit
  • Measure temperature differential using relative mode


Specifications:

  • DC Voltage: Max Range: 600V, Max Resolution:0.1mV, Basic Accuracy: 0.5%
  • AC Voltage: Max Range: 600V, Max Resolution:0.1mV, Basic Accuracy: 0.5%
  • DC Amps: Max Range:400V, Max Resolution:0.1A, Basic Accuracy: 0.8%
  • DC Microamps: Max Range: 1100uA, Max Resolution:0.01uA, Basic Accuracy: 0.8%
  • AC Amps: Max Range: 400A, Max Resolution:0.1A, Basic Accuracy: 3%
  • Resistance: Max Range: 100MΩ, Max Resolution:0.1Ω, Basic Accuracy: 1%
  • Frequency: Max Range: 110MHz, Max Resolution:0.1Hz, Basic Accuracy: 1%
  • Capacitance: Max Range: 110mF, Max Resolution:0.001nF, Basic Accuracy: 3%
  • Temperature: Max Range:1000°F, Max Resolution:0.1°F, Basic Accuracy: 1%
  • Non-Contact Voltage (NCV): 24VAC and above
  • Continuity Buzzer: <35Ω
  • Diode Test: 1.5mA Max
  • True RMS Response:  Yes
  • Peak Hold: Yes
  • Relative Mode: Yes
  • Min/Max Record: Yes
  • Data Hold: Yes
  • % Total Harmonic Distortion: No
  • Range Selection: Auto / Manual
  • Display Type: 11000 count LCD
  • Operating Temperature: 32°F to 113°F
  • Relative Humidity: 80% non-condensing
  • Storage Temperature: 14°F to 122°F
  • Battery Type: 9V (MN1604)
  • Battery Life: 80hrs typical
  • Auto Off / Sleep Mode: Yes
  • Dimensions (H x L x W): 1.3” x 10” x 2.5”
  • Weight: 0.8lb
  • Agency Approval: CE IEC 61010: CAT III, 600V cULus 61010
     
2725-2A Old Wrightsboro Rd. Wilmington, NC 28405 Remit Address: PO Box 602601 Charlotte NC 28260-2601 Copyright 2003-2012 Global Test Supply All rights reserved.