• View Cart (0)
  • |
  • Quote Cart (0)
  • |
  • Site Map
1-888-610-7664
Go

TPI 100 One button, easy-operation Digital Multimeter with protective boot

TPI 100
TPI Store

View TPI Products Visit TPI Store

No Reviews yet for this product

MFG Part # TPI 100
Condition New
Our price $49.95

No more guessing what range to switch your meter to — the TPI 100 does it automatically!

  • Automatically switches between ACV, DCV, and ohms (resistance).
    • Simple to use. Meter selects function and range, just connect the leads to the device under test.
  • Single button operation.
    • EZ to use. Enables users with limited knowledge to perform tests safely.
  • 0 to 600 volts AC and DC
    • Enough range to safely perform measurements
  • 10 MΩ internal impedance.
    • High impedance prevents inaccurate reading caused by circuit loading.
  • Auto power off.
    • Increases battery life by turning off the multimeter when not in use.
  • 4,000 count display 
  • Up to 40MΩ


Applications:

  • Measure line and control circuit voltages
  • Measure resistance of motor windings, transformers, and solenoids
  • Make general AC and DC voltage and resistance measurements
  • Measure the resistance of elements and electric heater cores
  • Test continuity of wiring
  • Verify voltage at breakers and outlets
  • Use as a back-up meter in your tool box


Specifications:

  • DC Volts     
    • Maximum Input: 600V (Minimum Input = 1.5V) Maximum, Resolution: 0.001V, Accuracy: +/-0.5%
  • AC Volts    
    • Maximum Input: 600V (Minimum Input = 1.7V) Maximum, Resolution: 0.001V, Accuracy: +/-0.8%
  • DC Amps     N/A
  • AC Amps     N/A
  • Resistance (Ohms)    
    • Maximum Input: 40MΩ, Maximum Resolution: 0.1Ω, Accuracy: +/-0.8%
  • Frequency     N/A
  • Capacitance     N/A
  • Inductance     N/A
  • Temperature (K-Type Thermocouple)     N/A
  • Continuity     N/A
  • Diode     N/A
  • Duty Cycle     N/A
  • True RMS Responding     No
  • Conductance     No
  • Pulse Width     No
  • Data Hold     No
  • Min/Max Record     No
  • Time Stamp Logging     No
  • Relative Mode     No
  • Compare Mode     No
  • RS-232 Output     No
  • Process Loop Output     No
  • Sleep Mode / Auto Off     No
  • Protective Boot     Yes (standard)
  • Display Type     4000 count LCD
  • Range Selection     Auto including function selection
  • Operating Temperature     32°F to 104°F (0°C to 40°C)
  • Storage Temperature     14°F to 122°F (-10°C to 50°C)
  • Humidity     80% non-condensing
  • Size     6” x 3.1” x 1.2” (187mm x 86mm x 33mm) with boot
  • Weight     12oz (340g) with boot
  • Battery Type     1.5V “AA” Alkaline (2)
  • Battery Life     500hrs Typical
  • Overvoltage Category     CAT III 600V
  • Agency Approval     IEC 1010-1
  • Warranty     3 Years
2725-2A Old Wrightsboro Rd. Wilmington, NC 28405 Remit Address: PO Box 602601 Charlotte NC 28260-2601 Copyright 2003-2012 Global Test Supply All rights reserved.