Phase II PTG-3500 Integrated Coating Thickness Gauge

Simplicity in coating thickness measurement!

The PHASE II PTG-3500 coating thickness gauge can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.

 

With this state of the art thickness gauge, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with 1 auto-detect external probe.

 

Main Technical Data

• Measuring range: 0-2000 µ m max. or 0-80 mils
• Resolution: 0.1µ m / 0.01mils(0-99µ m) or 1µ m (over 100µ m)
• Guaranteed tolerance:
• After one-point calibration: +/- 1-3%n or 2µ m (whichever is greater)
• Display: 4 digits (digit height = 10mm/0.4")
• Min. measuring area: 0.2" x 0.2" (5mm x 5mm)
• Min. radius of curvature: Convex: 0.12" (3mm)
• Concave: 1.2" (30mm)
• Min. substrate thickness: Ferrous: 20 mils (0.5mm)
• Non-ferrous: 2 mils (50 µ m)
• Calibration: Zero Calibration
• Foil calibration
• Max. Surface temperature of test object: 302 degrees F (contact time max is 2 seconds)
• Power source: 4 AA batteries
• Dimensions: 161 x 69 x 32mm
• Weight: 9oz. (260g)