Features:

• Load cell driven system provides precise control of test force application
• Direct digital reading
• Engineered to obtain highly senstivie and accurate readings
• Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
• Measuring range: 8-650HBW

Specifications:

• Innovative closed loop technology. The Brinell hardness tester incorporates the latest load cell technology. the test load is applied via a closed-loop controlunit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friciton problems but also makes the equipment less sensitive to misalighnments caused by vibrations.
• The whole weight of the tester is 50% less than the traditional dead weights type tester
• Test load selection by keyboard and LCD screen
• Fully automatic test cycles. The Brinell hardness tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated. 
• Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen. 
• The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
• Equipped with a 20x optical microscope to measure the diameter of Brinell indention.
• Brinell hardness calculator make the hadness value calculation easier and convenient.