Hioki 8956 ANALOG UNIT Basic Specifications

• Measurement functions Number of channels: 2, for voltage measurement
• Input connectors Isolated BNC connector (input impedance 1 M?, input capacitance 40 pF), Max. rated voltage to earth: 300 V AC, DC (with input isolated from the unit, the maximum voltage that can be applied between input channel and chassis and between input channels without damage)
• Measurement range 5 mV to 20 V/division, 12 ranges, full scale: 20 divisions, AC voltage for possible measurement / display using the memory function: 280 V rms, low-pass filter: 5/500/5k/1M H
• Measurement resolution 1/100 of measurement range (using 12-bit A/D conversion; installed in 8860 / 8861) Highest sampling rate 20 MS/s (simultaneous sampling in 2 channels)
• Accuracy DC amplitude: ±0.4% of full scale (with filter 5 Hz)
• Zero position: ±0.1% of full scale (with filter 5 Hz, after zero adjustment)
• Frequency characteristics DC to 10 MHz ±3 dB, with AC coupling: 7 Hz to 10 MHz ±3 dB
• Input coupling DC, GND, AC
• Max. allowable input 400 V DC (the maximum voltage that can be applied across input pins without damage)
• Dimensions and mass approx. 170 (6.69in) W × 20 (0.79in) H × 148.5 (5.85in) D mm, approx. 290 g (10.2 oz)
• Accessories None