Hioki 3284 CLAMP ON AC/DC HiTESTER

Analysis for DC to distorted waves

• 3284: 200 Arms, clamp aperture: 33 mm dia.
• 3285: 2000 Arms, clamp aperture: 55 mm dia.
• Inrush current crest value.
• RMS value of full-wave rectified waveforms.
• Waveform and harmonic analysis.

SPECIFICATIONS:

• AC Current range AC (RMS or Peak value)20.00 or 200.0 A
• AC, 2 ranges (±1.3 % rdg. ±3 dgt. at 50 or 60Hz)
• AC+DC (RMS or Peak value)20.00 or 200.0 A AC, 2 ranges (±1.3 % rdg. ±13 dgt. at 50 or 60Hz), Effective value rectifier
• DC Current range DC (Average or Peak value)20.00 or 200.0 A DC, 2 ranges (±1.3 % rdg. ±3 dgt.)
• AC Voltage range AC (RMS or Peak value)30.00 to 600 V
• AC, 3 ranges (±1.0 % rdg. ±3 dgt. at 50 or 60Hz)
• AC+DC (RMS or Peak value)30.00 to 600 V AC, 3 ranges (±1.0 % rdg. ±7 dgt. at 50 or 60Hz), Effective value rectifier
• DC Voltage range DC (Average or Peak value)30.00 to 600 VDC, 3 ranges (±1.0 % rdg. ±3 dgt.)
• Other functions Frequency: 1 to 1000 Hz, Mode:
• Max./Min./AVE./RMS Record mode/Auto-off
• Analog output DC, or AC 1 V /f.s. ,Level output: with REC mode, Waveform output: with MON mode
• Frequency characteristics (at AC current / voltage) DC, 10 to 2 kHz
• Display section Current / 2000 dgt. Voltage / 3000 dgt. Bar graph / 35 seg.
• Sampling rate 2 or 4 times/sec (Slow: 1 time/3 sec)
• Crest factor (RMS) 2.5 (1.7 at 600 V range), 1.5 (200 A range)
• Max. circuit voltage 600 V AC rms (insulated wire)
• Power supply 6F22(006P) × 1, Continuous use 25 hours, or AC adapter
• Core jaw diameter 33 mm(1.30 in)
• Dimensions (WxHxD), Weight 62 mm(2.44") x 230 mm(9.06") x 39 mm(1.54"), 460 g (16.2 oz)