AEMC F09 Clamp-On Meter

The Model F09 is a high performance clamp-on meter built into a rugged compact sized case, with exceptional ergonomic design and extraordinary measurement possibilities. Integrating a fast microprocessor sampling at a high rate, this meter is completely automatic and performs TRMS measurements on the most distorted waveforms.
The Model F09 automatically detects AC or DC in Voltage and Current. It has a V-Live^™ function to warn of the use of live circuits or elevated voltages. This meter can measure inrush currents from 1 cycle up to 10 cycles and frequency. It also measures Phase Rotation (using only two leads!), Power Factor and Power. Other features include: auto-ranging, 4000-count display and Auto-Off.

Features:

• Hand-held size, ultra practical and ergonomic design
• TRMS measurement through fast sampling - accurate on non-linear waveforms
• AC or DC and AC+DC measurement in V and A
• 4kHz Bandwidth
• 3.5 Crest Factor at 600Arms and 900Vrms
• Peak function captures 500µs signals
• Measure Inrush Current on 0.5, 1, 2.5, 5 and 10 cycles (15 to 70Hz)
• Min/Max automatic capture of extreme values at 100ms samples
• Measure V, A, Ohms, kW, Hz, Phase Rotation, AC + DC
• Continuity at programmable buzzer threshold from 1 to 40Ω
• Selectable V-Live™ function (buzzer) warns of live circuit
• Automatic DC current zeroing
• Backlit LCD
• Battery life displayed directly in hours at the push of a button
• EN 61010-1, EN 61010-2-032, 600V Cat. III
• Includes soft carrying case and test leads

 
Applications:

• Electrical maintenance
• Electrical power distribution
• Safety lighting system maintenance
• Automotive test troubleshooting
• Industrial maintenance
• HVAC