The Agilent E5070A network analyzer provides the comprehensive measurement capability required to test both multiport and balanced devices. The ENA Series offer 2-, 3-, or 4-test ports for simultaneous measurement of all signal paths in these multiport devices. The ENA series delivers extensive analysis capabilities such as time domain transform with gating and mixed mode S-parameter mesurements with matching circuit embedding/de-embedding and impedance conversion. In addition to the built-in Microsoft® Visual Basic for Applications (VBA) capability, the analyzer can be programmed via its COM or SCPI interface. The ENA Series has a Windows®-based user interface and large 10.4-inch LCD. Built-in interfaces, such as GPIB, 10/100BaseT Ethernet, USB, VGA and parallel also included. Features 300 kHz to 3 GHz 125 dB dynamic range at test port (typical) 9.6 µs/point sweep speed 0.001 dB rms trace noise Integrated 2-, 3- and 4-ports available with full port correction TRL/LRL calibration for non-coaxial measurements Built-in balanced measurement to interpret mixed mode S-parameters Fixture embedding/de-embedding and port characteristic impedance conversion Time domain transform with gating Up to 9 ports extension using E5091A multiport test set Bundled Microsoft® Visual Basic for Applications 10.4-inch color LCD (touch screen operation optional) Windows® and Microsoft® are U.S. registered trademarks of Microsoft Corp