Wagner Meters 890-00555-001 Offers

The Wagner C555 is a non-destructive hand-held concrete moisture meter for comparative measurement of concrete and other surfaces. The Wagner C555 concrete moisture meter is designed to be in full compliance with ASTM F2659 to assist in the preliminary evaluation of the comparative moisture condition of concrete, gypsum, and other floor slabs and screeds. Comparative means how wet or dry one slab section might be when compared to another. Concrete moisture meters like the Wagner C555 are essential tools for contractors, flooring installers, and building inspectors who work with concrete to assist with pinpointing problem areas and determine where to place the Rapid RH L6 Smart Sensors. The Wagner C555 is designed to give an average moisture indication of the area it is scanning.

However, using readings from surface concrete moisture meters should never be the sole factor when determining if a concrete slab is dry enough to install a floor covering. The versatile C555 concrete moisture meter features an onboard ambient temperature and relative humidity sensor as well as a Relative Measurement mode for comparative measurement of other smooth surface materials such as brick or cement blocks with a scale from 1 to 100. The C555 Audio button allows a user to set a high moisture content alarm threshold within the Standard Measurement mode programmable to sound alert at readings from 0 to 6.9%. This function is helpful when scanning a section of concrete to locate higher moisture content areas without continually looking at the digital display. The C555 moisture meter features an abrasion-resistant Teflon sensor surface that measures 2.0 inches wide by 2.5 inches long and measures a depth of 0.5 inches.

The C555 has an easy-to-read digital display scaled in 0.1% increments when in Standard Measurement mode. In the Standard Measurement mode, the C555 measures moisture within the 0.1% to 6.9% moisture reading range. The C555 moisture meter comes with an ON-Demand Calibrator platform to perform fast and easy calibration to factory settings in the field. The concrete moisture meter C555 provides a valuable non-damaging surface scan indicating the high and low moisture zones giving you optimal targeting of areas to place Wagner Rapid RH L6 sensors to get the best readings from your in-situ RH testing.

Features

• ASTM F2659 compliant
• Digital display
• Measures to 0.5-inch depth
• Integrated ambient temperature and RH sensors
• Moisture scale reads from 0% to 6.9%
• Audio threshold alarm
• Hold button to freeze a reading
• Relative mode can be used on other concrete-similar materials such as concrete block
• Scuff-resistant Teflon sensor pad
• ASTM F2659 compliant
• Digital display
• Measures to 0. 5-inch depth
• Integrated ambient temperature and RH sensors
• Moisture scale reads from 0% to 6.9%
• Audio threshold alarm
• Relative mode can be used on other concrete-similar materials such as concrete block
• Scuff-resistant Teflon sensor pad
• Low battery alert
• Automatic shutoff when not in use
• Protective rubber boot
• Hold button to "freeze" current reading
• Large moisture measurement sensor area

Applications

• Contractors, Flooring Installers, Building Inspectors