Veris PWLX04S Wet Media Differential Pressure Transducer, 0 to 100 psig

Downloads: datasheet

The wet media differential pressure transducer incorporates microprocessor profiled sensors for exceptional accuracy and reliability.

The wet media differential pressure transducer incorporates microprocessor profiled sensors for exceptional accuracy and reliability.

Features

Jumper-selectable output switch for normal (4 to 20 mA) or reverse (20 to 4 mA) operation provides application flexibility
Rugged, die-cast enclosure provides NEMA 4 sealing
Jumper-controlled electronic surge dampening for high stability
Push-button zero calibration ensures there are no trim pots to adjust
Lowest total installed cost
Jumper-selectable port swap feature eliminates costly replumbing when the high and low ports are improperly plumbed; simply change the jumper position from normal to swap and problem solved!
Dual sensor design eliminates the requirement for a bypass valve assembly in most applications
Switch-selectable pressure ranges means fewer models to order and stock
Push-button and remote zero adjustment help maintain accuracy and prevent callbacks with automatic zero calibration

Applications

Input Power	12 to 30 VDC/24 VAC nominal
Maximum Current Draw	DC: 125 mA; AC: 280 mA
Output	3-wire transmitter; user selectable 4 to 20 mA, (clipped and capped)/0 to 5 V/0 to 10 V
Surge Damping	Electronic; 5-second averaging
Accuracy	At 77°C (25°C): ±1% FS (range A, B, C), ±2% FS (range D)
Test Mode	Overrides output to full scale (20 mA, 5 V, 10 V)
Pressure Range (Selectable)	0 to 10/20/50/100 psid (0 to 0.34/0.69/1.72/3.45 bar)
Product Operating Environment	-140 to 130°F (-10 to 55°C); 0 to 90% RH, non-condensing
Long Term Stability	±0.25% per year
Zero Adjust	Push-button auto-zero and digital input (2-pos terminal block)
Status Indication	Dual-color LED: green = normal, green blinking = low > high, red = over-range, red blinking = over-pressure
Housing Material	White powder-coat aluminum
Media Compatibility	Media compatible with 17 to 4 PH stainless steel
Proof Pressure	Max 2 x FS range
Burst Pressure	Max 5 x FS range
Temperature Compensated Range	32 to 122°F (0 to 50°C); TC Zero <±1.5% of product FS per sensor; TC Span<±1.5% of product FS per sensor (2 sensors per unit)
Media Temp Limits	-4 to 185±F (-20 to 85±C); 0 to 90% RH non-condensing

datasheet for the Veris PWLX04S Wet Media Differential Pressure Transducer, 0 to 100 psig

The wet media differential pressure transducer incorporates microprocessor profiled sensors for exceptional accuracy and reliability.

Features

Jumper-selectable output switch for normal (4 to 20 mA) or reverse (20 to 4 mA) operation provides application flexibility
Rugged, die-cast enclosure provides NEMA 4 sealing
Jumper-controlled electronic surge dampening for high stability
Push-button zero calibration ensures there are no trim pots to adjust
Lowest total installed cost
Jumper-selectable port swap feature eliminates costly replumbing when the high and low ports are improperly plumbed; simply change the jumper position from normal to swap and problem solved!
Dual sensor design eliminates the requirement for a bypass valve assembly in most applications
Switch-selectable pressure ranges means fewer models to order and stock
Push-button and remote zero adjustment help maintain accuracy and prevent callbacks with automatic zero calibration

Applications

Input Power	12 to 30 VDC/24 VAC nominal
Maximum Current Draw	DC: 125 mA; AC: 280 mA
Output	3-wire transmitter; user selectable 4 to 20 mA, (clipped and capped)/0 to 5 V/0 to 10 V
Surge Damping	Electronic; 5-second averaging
Accuracy	At 77°C (25°C): ±1% FS (range A, B, C), ±2% FS (range D)
Test Mode	Overrides output to full scale (20 mA, 5 V, 10 V)
Pressure Range (Selectable)	0 to 10/20/50/100 psid (0 to 0.34/0.69/1.72/3.45 bar)
Product Operating Environment	-140 to 130°F (-10 to 55°C); 0 to 90% RH, non-condensing
Long Term Stability	±0.25% per year
Zero Adjust	Push-button auto-zero and digital input (2-pos terminal block)
Status Indication	Dual-color LED: green = normal, green blinking = low > high, red = over-range, red blinking = over-pressure
Housing Material	White powder-coat aluminum
Media Compatibility	Media compatible with 17 to 4 PH stainless steel
Proof Pressure	Max 2 x FS range
Burst Pressure	Max 5 x FS range
Temperature Compensated Range	32 to 122°F (0 to 50°C); TC Zero <±1.5% of product FS per sensor; TC Span<±1.5% of product FS per sensor (2 sensors per unit)
Media Temp Limits	-4 to 185±F (-20 to 85±C); 0 to 90% RH non-condensing