Customer Rating

4.8/5 Stars

20171 REVIEWS

UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Model: UP100STG

UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit-

Downloads: datasheet manual

More UE Systems Products

Ask an Expert

UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Model: UP100STG

The Ultraprobe 100 is the perfect fit for someone looking for cost-effective analog ultrasonic inspection technology. The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges.

The Ultraprobe 100 is the perfect fit for someone looking for cost-effective analog ultrasonic inspection technology. The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges.

Discontinued!

This product has been discontinued and is no longer available.

There is no direct replacement, however we recommend the:

UE Systems UP100S Scanner Leak Detection Kit-

UE Systems UP100S Scanner Leak Detection Kit

Model: UP100S

Practical tool for any leak detection, steam trap inspection or mechanical troubleshooting program. Ultrasound can be easily blocked or shielded.

Learn More

Not what you're looking for? Let’s do a search and help you find what you need.

UE Systems UP100STG Offers

Features

  • Ultrasound is very directional and localized
  • Ultrasound can be easily blocked or shielded
  • Ultrasound instruments can be used in noisy environments
  • Changes in ultrasound provide early warning of potential problems
  • 8-position sensitivity dial with decibel indications
  • LED bar graph display in which each LED equals approximately 3 dB - ideal for calculating decibel level
Applications
  • Pressure and vacuum leak detection
  • Valve seat leak detection
  • Exhaust system leaks
  • Heat exchangers/boilers/condensers
  • Steam trap inspection
  • Bearing testing
  • Gear/gear box inspection
  • Wind/noise/water leaks
  • General mechanical inspection and trouble shooting
  • Tank/pipe leak testing
  • Electrical inspection

UE Systems UP100STG Specifications

Circuitry SMD/Solid state hybrid heterodyne receiver
Frequency Response 20 to 100 kHz (centered at 38 to 42 kHz)
Indicator 10 segment LED bar graph (red)
Sensitivity Selection 8 position precision attenuation
Headset Noise isolating type: double headset wired monophonic impedance; 16Ω. Over 23dB noise attenuation. Meets ANSI specifications & OSHA standards
Probes Scanning Module (SCM-1): Stainless steel unisonic (single transducer) piezo electric crystal type
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signal
Transmitter Patented warble tone transmission
Response Time 300 m/sec
Power Supply 9 V alkaline battery
Dimensions 5.25 x 2 x 8" (133 x 50 x 203 mm)
Weight 11 oz (0.3 kg)
Click here for complete specifications on the UE Systems UP100STG

What's included with the UE Systems UP100STG

  • Pistol Housing with LED Bar Graph Meter
  • 8 Position Sensitivity Selection
  • Low Battery Indicator
  • Scanning Module
  • Warble Tone Generator with Battery Charger
  • Lightweight Foam Lined Headset
  • 9 V Alkaline Battery Recharger
  • Cordura Soft Pack
  • Instruction Manual
datasheet for the UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit manual for the UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Ask a question about UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Customer Reviews for the UE Systems UP100STG

UE Systems UP100STG Offers

Features

  • Ultrasound is very directional and localized
  • Ultrasound can be easily blocked or shielded
  • Ultrasound instruments can be used in noisy environments
  • Changes in ultrasound provide early warning of potential problems
  • 8-position sensitivity dial with decibel indications
  • LED bar graph display in which each LED equals approximately 3 dB - ideal for calculating decibel level
Applications
  • Pressure and vacuum leak detection
  • Valve seat leak detection
  • Exhaust system leaks
  • Heat exchangers/boilers/condensers
  • Steam trap inspection
  • Bearing testing
  • Gear/gear box inspection
  • Wind/noise/water leaks
  • General mechanical inspection and trouble shooting
  • Tank/pipe leak testing
  • Electrical inspection
Show More...

UE Systems UP100STG Specifications

Circuitry SMD/Solid state hybrid heterodyne receiver
Frequency Response 20 to 100 kHz (centered at 38 to 42 kHz)
Indicator 10 segment LED bar graph (red)
Sensitivity Selection 8 position precision attenuation
Headset Noise isolating type: double headset wired monophonic impedance; 16Ω. Over 23dB noise attenuation. Meets ANSI specifications & OSHA standards
Probes Scanning Module (SCM-1): Stainless steel unisonic (single transducer) piezo electric crystal type
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signal
Transmitter Patented warble tone transmission
Response Time 300 m/sec
Power Supply 9 V alkaline battery
Dimensions 5.25 x 2 x 8" (133 x 50 x 203 mm)
Weight 11 oz (0.3 kg)
Click here for complete specifications on the UE Systems UP100STG

What's included with the UE Systems UP100STG

  • Pistol Housing with LED Bar Graph Meter
  • 8 Position Sensitivity Selection
  • Low Battery Indicator
  • Scanning Module
  • Warble Tone Generator with Battery Charger
  • Lightweight Foam Lined Headset
  • 9 V Alkaline Battery Recharger
  • Cordura Soft Pack
  • Instruction Manual
datasheet for the UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit manual for the UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Ask a question about UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Customer Reviews for the UE Systems UP100STG

More UE Systems Products

Calibration Lab


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal
  • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.