- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
A fiber optic splicing kit that pairs the FSP200 optical fusion splicer with the FCL200 fiber cleaver. This kit provides fast splice and heat times, rugged portability, and the essential tools needed for efficient fiber installation, maintenance, and repair.
A fiber optic splicing kit that pairs the FSP200 optical fusion splicer with the FCL200 fiber cleaver. This kit provides fast splice and heat times, rugged portability, and the essential tools needed for efficient fiber installation, maintenance, and repair.
The FSP200 touchscreen optical fusion splicer uses core alignment technology, which allows the technician to reliably fuse fiber optic cables with low splice losses in as little time as seven seconds. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTT(x), P2P installations, and all standard fibers are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fiber applications.
The FSP200 uses the Tempo Communications Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure-prone mechanical connector. Splice-on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice-on connector is pre-cleaved and also eliminates the need for a splice tray.
Other manufacturers’ splice-on connectors are compatible with the Tempo Communications fusion splicers with the use of an optional splice-on connector adapter.
The FSP200 is available in the popular Contractor Kit (FSP200-KIT2) which bundles the fusion splicer, FCL200 cleaver, an extra battery, and fiber strippers so the technician has all of the tools they will need to get the job done right. The Splicer and Cleaver Kit configuration (FSP200-KIT1) includes the FSP200 fusion splicer and FCL200 cleaver. See the Models section below for more details. Backed by a 3-year warranty.
Features
| FSP200 | |
| Applicable Fibers | SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF |
| Fiber Cleaved Length | 0.39" (10 mm) |
| Cladding Diameter | 100 to 1000μm |
| Fiber Count | Single |
| Fiber Aligning Method | Core Alignment |
| Splice Loss | (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF) |
| Splicing Mode | 60 Preset / User Definable Modes |
| Splice Time | 7 seconds |
| Boot Time | 5 seconds |
| Number of Splices Per Battery Charge | 200 (including 2.36" (60 mm) heat shrink cycle) |
| Splice Connector | SC, LC, FC, ST |
| Arc Calibration Mode | Automatic & Manual |
| Protection Sleeve Length | 2.36" (60 mm), 1.57":(40 mm), Micro Sleeves |
| Ingress Protection | IP5X (Dust); IPX2 (Water) |
| Storage of Splice Results | 5,000 Results, 100 screenshots |
| Drop Test | 29.92" (76 cm) on five axis |
| Tension Test | 2N |
| Fiber Display Magnification | 200x |
| Tube Heating Time | 18 seconds |
| Attenuator Mode | 0.1 to 15 dB |
| Electrode Life | 5,000 Splices |
| Display | 5" (12.70 cm) Color LCD Touchscreen |
| Connectivity | USB |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Operating Conditions | Pressure: 0 to 16,404' (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to 131°F (-20 to 55°C) |
| Power Supply | 100 to 240V AC Adapter; Li-ion Battery (4400 mAh) |
| Vibration Resistance | 10Hz – 500Hz with a spectral density of 0.03 g2/Hz |
| Password Protection | Yes |
| Dimensions | 4.9" x 4.9”" x 5.3" (125 x 125 x 135 mm) |
| Weight | 3.74 lbs (1.7 kg) with battery |
| FCL200 | |
| Applicable Fibers | SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657) |
| Fiber Cleaved Length | 0.2 to 0.79" (5 to 20mm) |
| Cladding Diameter | 125μm |
| Coating Diameter | 0.20 mm, 0.25 mm and 0.9 mm |
| Fiber Count | Single and Ribbon (12) |
| Cleaving Angle | < 1.5° |
| Blade Life | 48,000 Cleaves |
| Dimensions | 2.55 x 3.85 x 2.55" (65 x 98 x 65 mm) |
| Weight | 0.77 lbs (349.27 g) |
| FSP200 | |
| Applicable Fibers | SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF |
| Fiber Cleaved Length | 0.39" (10 mm) |
| Cladding Diameter | 100 to 1000μm |
| Fiber Count | Single |
| Fiber Aligning Method | Core Alignment |
| Splice Loss | (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF) |
| Splicing Mode | 60 Preset / User Definable Modes |
| Splice Time | 7 seconds |
| Boot Time | 5 seconds |
| Number of Splices Per Battery Charge | 200 (including 2.36" (60 mm) heat shrink cycle) |
| Splice Connector | SC, LC, FC, ST |
| Arc Calibration Mode | Automatic & Manual |
| Protection Sleeve Length | 2.36" (60 mm), 1.57":(40 mm), Micro Sleeves |
| Ingress Protection | IP5X (Dust); IPX2 (Water) |
| Storage of Splice Results | 5,000 Results, 100 screenshots |
| Drop Test | 29.92" (76 cm) on five axis |
| Tension Test | 2N |
| Fiber Display Magnification | 200x |
| Tube Heating Time | 18 seconds |
| Attenuator Mode | 0.1 to 15 dB |
| Electrode Life | 5,000 Splices |
| Display | 5" (12.70 cm) Color LCD Touchscreen |
| Connectivity | USB |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Operating Conditions | Pressure: 0 to 16,404' (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to 131°F (-20 to 55°C) |
| Power Supply | 100 to 240V AC Adapter; Li-ion Battery (4400 mAh) |
| Vibration Resistance | 10Hz – 500Hz with a spectral density of 0.03 g2/Hz |
| Password Protection | Yes |
| Dimensions | 4.9" x 4.9”" x 5.3" (125 x 125 x 135 mm) |
| Weight | 3.74 lbs (1.7 kg) with battery |
| FCL200 | |
| Applicable Fibers | SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657) |
| Fiber Cleaved Length | 0.2 to 0.79" (5 to 20mm) |
| Cladding Diameter | 125μm |
| Coating Diameter | 0.20 mm, 0.25 mm and 0.9 mm |
| Fiber Count | Single and Ribbon (12) |
| Cleaving Angle | < 1.5° |
| Blade Life | 48,000 Cleaves |
| Dimensions | 2.55 x 3.85 x 2.55" (65 x 98 x 65 mm) |
| Weight | 0.77 lbs (349.27 g) |
