SCS WSMONITOR2 Single Wire Continuous Monitors

Model: WSMONITOR2

Be the first to review this product

SCS WSMONITOR2 Single Wire Continuous Monitors-

Downloads: datasheet manual

More SCS Products

Ask an Expert

SCS WSMONITOR2 Single Wire Continuous Monitors

Model: WSMONITOR2

Be the first to review this product

This monitor is designed to continuously test the connection integrity of the entire ground system including the person, the wristband and the coiled cord. This system is fully automatic and activates when a wrist strap is plugged into the unit. The unit is powered and grounded by the AC adapter.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

SCS 724 Workstation Monitor with power adapter

Model: 724 | Order No: 724/A

Continuously monitor the path-to-ground integrity of two operators and one conductive or dissipative work surface with this single workstation monitor and power adapter. In addition, it is designed and tested for use with SCS dual-wire wrist straps and work surface mats (each sold separately).

Learn More

SCS WSMONITOR2 Offers

Single wire continuous monitors offer the most cost effective means for continuously testing and connection integrity of the entire ground lop including the person, the wrist band and coil cord. By using new impedance sensing technology, adjustments and false alarms are virtually eliminated. This system is fully automatic and activates when a wrist strap is plugged into the unit. It provides a green light for safe condition and a red light and tone for unsafe condition. Units are powered and grounded by an AC adapter. Compatible with most standard wrist straps.

Features

Monitors one wrist strap/person and the mat
Compatible with any standard wrist strap
Easy to use: Simply plug in the wrist strap
Easy to install: Attach the monitor to the bench with included hardware, connect the mat and plug it in

SCS WSMONITOR2 Specifications

Input Voltage and Frequency	AC/DC Power Adapter
Power Input	100-240VAC, 50/60 Hz
Power Output	9VDC @ 0.5A
Cable Length	5 ft. (1.5 m)
Operating Temperature	41 to 85°F (5 to 30°C)
Environmental Requirements	Indoor use only at altitudes less than 6500 ft. (2 km)
Dimensions	1.3" x 3.7" x 3.0" (33 mm x 94 mm x 76 mm)
Weight	0.3 lbs. (0.14 kg)
Operator Test Range	Pass: 0 to 10 megohms, Fail: > 12 megohms
Work surface Test Range	Pass: 0 to 6 megohms, Fail: > 8 megohms
Operator Test Voltage	3.5VDC @ open circuit

Click here for complete specifications on the SCS WSMONITOR2

What's included with the SCS WSMONITOR2

WSMONITOR2 Constant Monitor
Mat Monitor Cord
Power Adapter
STACKJACK
Alligator Clip
Screws (2)
Hook and Loop Fasteners (2)
Certificate of Calibration

datasheet for the SCS WSMONITOR2 Single Wire Continuous Monitors manual for the SCS WSMONITOR2 Single Wire Continuous Monitors

Ask a question about SCS WSMONITOR2 Single Wire Continuous Monitors

Customer Reviews for the SCS WSMONITOR2

Description ➕➖

SCS WSMONITOR2 Offers

Features

Monitors one wrist strap/person and the mat
Compatible with any standard wrist strap
Easy to use: Simply plug in the wrist strap
Easy to install: Attach the monitor to the bench with included hardware, connect the mat and plug it in

Specifications ➕➖

SCS WSMONITOR2 Specifications

Input Voltage and Frequency	AC/DC Power Adapter
Power Input	100-240VAC, 50/60 Hz
Power Output	9VDC @ 0.5A
Cable Length	5 ft. (1.5 m)
Operating Temperature	41 to 85°F (5 to 30°C)
Environmental Requirements	Indoor use only at altitudes less than 6500 ft. (2 km)
Dimensions	1.3" x 3.7" x 3.0" (33 mm x 94 mm x 76 mm)
Weight	0.3 lbs. (0.14 kg)
Operator Test Range	Pass: 0 to 10 megohms, Fail: > 12 megohms
Work surface Test Range	Pass: 0 to 6 megohms, Fail: > 8 megohms
Operator Test Voltage	3.5VDC @ open circuit