SCS 9910 Static Control Anti-Fatigue Mat, 3 ft. x Custom Length

Downloads: datasheet

Provides a flooring surface that will not generate static charge and will work as part of the path to ground an operator wearing ESD footwear.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Model: 9900

SCS Static Control Anti-Fatigue Mats enable workers to stand comfortably for long periods while minimizing the fatigue associated with standing work.

Learn More

Features

Reversible Conductive Rubber Floor Matting, Provides a flooring surface that does not generate a static charge and will act as part of the path to ground for an operator wearing ESD footwear
Rtt: < 1 x 10⁶ ohms per ANSI/ESD 7.1 and ESD TR53, Meets the required limits of ANSI/ESD S20.20 and is suitable flooring component in personnel grounding Footwear/Flooring System (Ref: STM97.1 and STM97.2). The resistance range of the surface layer remains low enough to act as a path to ground with the normal buildup of dirt and grime on the mat.
Low Profile, Reduces trip hazards and designed for use in high traffic areas and good for use under chairs and carts.
Made in the United States of America

General Specifications
	Typical Value	Test Method
Size	Standard: 3' x 5' (0.9 m x 1.5 m) Octagonal: 22ʺ (55.9 cm) Diameter Runners: 3' W x Custom Length
Thickness*	0.600ʺ (1.52 cm) with Beveled Edge
Durometer	46 Shore A
Composition	SBR Rubber Polymers
Resistance Surface to Ground Snap (Rtg)	< 1 x 105 ohms	ANSI/ESD STM7.1 and ESD TR53
Surface to Ground (Rtt)	< 2 x 105 ohms	ANSI/ESD STM7.1 and ESD TR53
Cleaning	Sweep, Vacuum or Damp Mop
Color*	Black
Edges	Solid Molded Rubber

*Color, texture and thickness may vary between lots and mills.Click here for complete specifications on the SCS 9910

datasheet for the SCS 9910 Static Control Anti-Fatigue Mat, 3 ft. x Custom Length

Features

Reversible Conductive Rubber Floor Matting, Provides a flooring surface that does not generate a static charge and will act as part of the path to ground for an operator wearing ESD footwear
Rtt: < 1 x 10⁶ ohms per ANSI/ESD 7.1 and ESD TR53, Meets the required limits of ANSI/ESD S20.20 and is suitable flooring component in personnel grounding Footwear/Flooring System (Ref: STM97.1 and STM97.2). The resistance range of the surface layer remains low enough to act as a path to ground with the normal buildup of dirt and grime on the mat.
Low Profile, Reduces trip hazards and designed for use in high traffic areas and good for use under chairs and carts.
Made in the United States of America

General Specifications
	Typical Value	Test Method
Size	Standard: 3' x 5' (0.9 m x 1.5 m) Octagonal: 22ʺ (55.9 cm) Diameter Runners: 3' W x Custom Length
Thickness*	0.600ʺ (1.52 cm) with Beveled Edge
Durometer	46 Shore A
Composition	SBR Rubber Polymers
Resistance Surface to Ground Snap (Rtg)	< 1 x 105 ohms	ANSI/ESD STM7.1 and ESD TR53
Surface to Ground (Rtt)	< 2 x 105 ohms	ANSI/ESD STM7.1 and ESD TR53
Cleaning	Sweep, Vacuum or Damp Mop
Color*	Black
Edges	Solid Molded Rubber