- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Portable and lightweight, this confined space kit simultaneously monitors and displays combustibles, oxygen, carbon monoxide, and hydrogen sulfide, and the innovative gas detection technology is ideal for many applications. In addition, this kit includes a multi-gas detector, sample draw pump, screwdriver, charger, and carrying case.
Portable and lightweight, this confined space kit simultaneously monitors and displays combustibles, oxygen, carbon monoxide, and hydrogen sulfide, and the innovative gas detection technology is ideal for many applications. In addition, this kit includes a multi-gas detector, sample draw pump, screwdriver, charger, and carrying case.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Useful in high-noise environments, this multi-gas detection kit offers dual audible alarm ports and LEDs on three sides, ensuring alarm conditions are obvious from multiple perspectives. In addition, utilizing catalytic combustion, electrochemical, and galvanic sensor technologies, each miniaturized sensor is made with high-quality control for reliable and long-lasting monitoring.
Features
Applications
| Combustible Gases (Methane as standard) | Detection principle: Catalytic combustion Detection range (increments): 0 to 100% LEL (1% LEL) Accuracy statement: ±5% of reading or ±2% LEL (whichever is greater) Preset (user-adjustable) and overscale (non-adjustable) alarms: 1st alarm: 10% LEL 2nd alarm: 50% LEL Over alarm: 100% LEL |
| Oxygen (O2) | Detection principle: Galvanic cell Detection range (increments): 0 to 40% volume (0.1% volume) Accuracy statement: ±0.5% O2 Preset (user-adjustable) and overscale (non-adjustable) alarms: Low alarm: 19.5% High alarm: 23.5% Over alarm: 40% |
| Hydrogen Sulfide (H2S) | Detection principle: Electrochemical cell Detection range (increments): 0 to 100 ppm (0.5 ppm) Accuracy statement: ±5% of reading or ±2 ppm H2S (whichever is greater) Preset (user-adjustable) and overscale (non-adjustable) alarms: 1st alarm: 10 ppm 2nd alarm: 30 ppm TWA alarm: 1 ppm STEL alarm: 5 ppm Over alarm: 100 ppm |
| Carbon Monoxide (CO) | Detection principle: Electrochemical cell Detection range (increments): 0 to 500 ppm (1 ppm) Accuracy statement: ±5% of reading or ±5 ppm CO (whichever is greater) Preset (user-adjustable) and overscale (non-adjustable) alarms: 1st alarm: 25 ppm 2nd alarm: 50 ppm TWA alarm: 25 ppm STEL alarm: 200 ppm Over alarm: 500 ppm |
| Sampling Method | Diffusion sampling standard/hand aspirator or motorized pump |
| Types of Alarms | Gas alarm: Two increasing alarms, STEL, TWA, overscale alarm; O2 decreasing/increasing Trouble alarm: Sensor disconnection, low battery, circuit error, calibration range error |
| Display of Alarm | Gas alarm: Flashing LEDs, intermittent buzzer (95 dB at 11.8" [30 cm]), flashing gas value, vibration Trouble alarm: Flashing LEDs, intermittent buzzer (95 dB at 11.8" [30 cm]), display of error message |
| Response Time | Within 30 seconds (T90) |
| Data Logging | Stores eight alarm trend sessions where readings are recorded 30 minutes before and after an alarm event 3600 data point capacity with a log time range of 10 to 300 hours (based on programmable interval times); and stores up to 100 calibration records |
| Display | Digital LCD displays all four gases simultaneously, with automatic backlight |
| Controls | Two buttons: POWER/MODE, AIR |
| Safety Design/Approvals | IECEx zone 0 Ex ia IIC T4 ATEX II 1G Ex ia IIC T4 cCSAus classified, as intrinsically safe Class I, Division 1, Groups A, B, C, D |
| Case Material | High-impact over-molded rubber Dust and water-resistant with IP67 approval |
| Operating Temperature and Humidity | 4 to 122°F (-20 to 50°C), 0 to 95% RH, non-condensing (splash resistant) |
| Continuous Operation | 20 hours after a 3-hour full charge (14 hours after 90 minute charge) |
| Power Source | Direct charging NiMH batteries, set of 2 |
| Dimensions | 2.7 x 3 x 1" (70 x 75 x 25 mm) |
| Weight | 4.6 oz (130 g) |
| Combustible Gases (Methane as standard) | Detection principle: Catalytic combustion Detection range (increments): 0 to 100% LEL (1% LEL) Accuracy statement: ±5% of reading or ±2% LEL (whichever is greater) Preset (user-adjustable) and overscale (non-adjustable) alarms: 1st alarm: 10% LEL 2nd alarm: 50% LEL Over alarm: 100% LEL |
| Oxygen (O2) | Detection principle: Galvanic cell Detection range (increments): 0 to 40% volume (0.1% volume) Accuracy statement: ±0.5% O2 Preset (user-adjustable) and overscale (non-adjustable) alarms: Low alarm: 19.5% High alarm: 23.5% Over alarm: 40% |
| Hydrogen Sulfide (H2S) | Detection principle: Electrochemical cell Detection range (increments): 0 to 100 ppm (0.5 ppm) Accuracy statement: ±5% of reading or ±2 ppm H2S (whichever is greater) Preset (user-adjustable) and overscale (non-adjustable) alarms: 1st alarm: 10 ppm 2nd alarm: 30 ppm TWA alarm: 1 ppm STEL alarm: 5 ppm Over alarm: 100 ppm |
| Carbon Monoxide (CO) | Detection principle: Electrochemical cell Detection range (increments): 0 to 500 ppm (1 ppm) Accuracy statement: ±5% of reading or ±5 ppm CO (whichever is greater) Preset (user-adjustable) and overscale (non-adjustable) alarms: 1st alarm: 25 ppm 2nd alarm: 50 ppm TWA alarm: 25 ppm STEL alarm: 200 ppm Over alarm: 500 ppm |
| Sampling Method | Diffusion sampling standard/hand aspirator or motorized pump |
| Types of Alarms | Gas alarm: Two increasing alarms, STEL, TWA, overscale alarm; O2 decreasing/increasing Trouble alarm: Sensor disconnection, low battery, circuit error, calibration range error |
| Display of Alarm | Gas alarm: Flashing LEDs, intermittent buzzer (95 dB at 11.8" [30 cm]), flashing gas value, vibration Trouble alarm: Flashing LEDs, intermittent buzzer (95 dB at 11.8" [30 cm]), display of error message |
| Response Time | Within 30 seconds (T90) |
| Data Logging | Stores eight alarm trend sessions where readings are recorded 30 minutes before and after an alarm event 3600 data point capacity with a log time range of 10 to 300 hours (based on programmable interval times); and stores up to 100 calibration records |
| Display | Digital LCD displays all four gases simultaneously, with automatic backlight |
| Controls | Two buttons: POWER/MODE, AIR |
| Safety Design/Approvals | IECEx zone 0 Ex ia IIC T4 ATEX II 1G Ex ia IIC T4 cCSAus classified, as intrinsically safe Class I, Division 1, Groups A, B, C, D |
| Case Material | High-impact over-molded rubber Dust and water-resistant with IP67 approval |
| Operating Temperature and Humidity | 4 to 122°F (-20 to 50°C), 0 to 95% RH, non-condensing (splash resistant) |
| Continuous Operation | 20 hours after a 3-hour full charge (14 hours after 90 minute charge) |
| Power Source | Direct charging NiMH batteries, set of 2 |
| Dimensions | 2.7 x 3 x 1" (70 x 75 x 25 mm) |
| Weight | 4.6 oz (130 g) |
.svg)
