RIDGID 48113 Offers

Small footprint, big performance.

The camera reel offers fast, easy setup and can take on the most diverse and demanding inspection conditions. Snap the CS6xPak digital recording monitor into the Compact2 docking system and you're ready for the ultra-fast set-up. Simply power the system on, tilt the monitor to the desired viewing angle and you're ready to capture high quality images and video clips to a USB drive.

Features

• Designed to inspect lines from 1.5 to 6"
• Self-leveling camera for a crisp, clear, in-pipe image that is always upright
• Push cable stiff enough to give you the power to push through small or restricted pipes, yet flexible enough to make multiple tight turns
• Use the integrated 512 Hz sonde and a receiver to locate points of interest that have been found in the pipe
• Quick-release docking system provides fast, efficient job setup
• Tilt the CS6Pak or CS6xPak monitor to the desired viewing angle while docked or easily remove it from the dock for convenient placement in your work area

There are three push cable guides on the frame, one inner guide and two outer guides. When using the Compact2, the camera, spring, and push cable should be threaded through all three guides

The sping clip helps guide the push cable and secures the camera spring when it is pushed back through the cable guides preventing it from retracting back into the drum. The spring clip must be in the operation position during transport to prevent the camera spring from retracting back into the drum.

Only lock open the spring clip when you are routing the camera. Keep the spring clip in the operation position during normal use.