- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
The process calibrator is designed for easy calibration and measurement of all current signal instruments in a 4 to 20 milliamp DC loop. It replaces a toolbox of single-function instruments, allowing you to measure milliamp, voltage, frequency, pH Ohms, thermocouples, RTDs, pressure loops diagnostics, and transmitter supply with one tool.
The process calibrator is designed for easy calibration and measurement of all current signal instruments in a 4 to 20 milliamp DC loop. It replaces a toolbox of single-function instruments, allowing you to measure milliamp, voltage, frequency, pH Ohms, thermocouples, RTDs, pressure loops diagnostics, and transmitter supply with one tool.
Detect hidden loop problems with patented current leak detection technology
Quickly diagnose troublesome ground faults and current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments!
Check all loop parameters at once with the LoopScope
Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies and loops with too many loads. Patented by PIE!
Automatically detect 2, 3 or 4 wire RTDs
Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor.
Swap out faulty transmitters to diagnose control issues
Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the LoopScope to simultaneously see the loop current, power supply voltage and loop loads for troubleshooting.
Troubleshoot wiring problems without a multimeter
Built in continuity checker with beeper quickly finds broken wires or shorts in instrumentation wiring.
Lighten up your toolbox
Pocket sized calibrator replaces toolbox of single function devices; dual channels allows for use of only 1 calibrator instead of 2!
Technician friendly operation
Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
Use it as a milliamp and voltage calibrator
Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV. Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV. Simulate 2 Wire transmitters. Power up transmitters and loops with built in 24 V power supply. Simplify HART hook ups with built in 250 ohm resistor
Calibrate directly in temperature (°C and °F)
The PIE 830 works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) and 1000 Ohm (3850) Copper 10 and 50 Ohm, Nickel 110 and 120 Ohm
Checkout flow and vibration systems
Source and read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, and to 20.000 kHz
Simulate pH probes into transmitters and analyzers
Source from 0.000 to 14.000 pH at 25°C (77°F) corresponding to +414.12 to -414.12 mV
Measure pressure with optional pressure modules
32 modules for gauge, differential, compound and absolute pressure
Quickly set any three outputs plus automatic stepping and ramping
Easily set any value quickly with the adjustable "DIAL"; store any three output settings for instant recall with the EZ-CHECK switch. Choose between 2, 3, 5 and 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
Measure temperature sensors, frequency pickups, loop currents, voltage levels and pressures
Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
| Temperature Range | Operating: -5 to 140°F (-20 to 60°C) Storage: -22 to 140°F (-30 to 60°C) Effect: ≤±0.005%/°C of full scale; cold junction sensor ≤ ±25 ppm/°C |
| Relative Humidity Range | 10% ≤RH ≤90% (32 to 95°F [0 to 35°C]), non-condensing 10% ≤RH ≤70% (95 to 140°F [35 to 60 °C]), non-condensing |
| Voltage | 60 V rms between all milliamp functions/Read V DC and Source V DC Thermocouple/RTD/Ohms/Frequency/Pressure |
| Normal Mode Rejection | 50/60 Hz, 50 dB Common: 50/60 Hz, 120 dB |
| Noise | ≤±½ least Significant Digit from 0.1 to 10 Hz |
| Batteries | 4 x AA Alkaline 1.5V (LR6) |
| Battery Life | Read Functions: ≥20 hours Source mA: ≥14 hours at 12 mA into 250Ω Pwr/Meas mA: ≥12 hours at 20 mA Source V, Ω, T/C, RTD and Hz: ≥20 hours |
| Display | High contrast graphic liquid crystal display with 0.35" (9 mm) high digits on main and 0.2" (5 mm) on mA display. LED backlighting for use in low lit areas |
| Dimensions | 5.63 x 3 x 1.60" (143 x 76 x 41 mm) |
| Weight | 12.1 oz (0.34 kg) |
| Temperature Range | Operating: -5 to 140°F (-20 to 60°C) Storage: -22 to 140°F (-30 to 60°C) Effect: ≤±0.005%/°C of full scale; cold junction sensor ≤ ±25 ppm/°C |
| Relative Humidity Range | 10% ≤RH ≤90% (32 to 95°F [0 to 35°C]), non-condensing 10% ≤RH ≤70% (95 to 140°F [35 to 60 °C]), non-condensing |
| Voltage | 60 V rms between all milliamp functions/Read V DC and Source V DC Thermocouple/RTD/Ohms/Frequency/Pressure |
| Normal Mode Rejection | 50/60 Hz, 50 dB Common: 50/60 Hz, 120 dB |
| Noise | ≤±½ least Significant Digit from 0.1 to 10 Hz |
| Batteries | 4 x AA Alkaline 1.5V (LR6) |
| Battery Life | Read Functions: ≥20 hours Source mA: ≥14 hours at 12 mA into 250Ω Pwr/Meas mA: ≥12 hours at 20 mA Source V, Ω, T/C, RTD and Hz: ≥20 hours |
| Display | High contrast graphic liquid crystal display with 0.35" (9 mm) high digits on main and 0.2" (5 mm) on mA display. LED backlighting for use in low lit areas |
| Dimensions | 5.63 x 3 x 1.60" (143 x 76 x 41 mm) |
| Weight | 12.1 oz (0.34 kg) |
