- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
With a 3.2 mm grid and 350 Ω resistance, this single-direction strain gauge combines solder pads and steel-compensated construction on a polyimide carrier. It measures static and dynamic strain. It is used for structural load testing and dynamic strain measurement.
With a 3.2 mm grid and 350 Ω resistance, this single-direction strain gauge combines solder pads and steel-compensated construction on a polyimide carrier. It measures static and dynamic strain. It is used for structural load testing and dynamic strain measurement.
OMEGA strain gauges are available in a variety of models to cover most strain measurement applications. Their rugged construction and flexibility make them suitable for highly accurate static and dynamic measurement. The measuring grid is formed by etching constantan foil, which is then completely sealed in a carrier medium composed of polyimide film.
The linear pattern strain gauges are used to measure strain in a single direction. They are often used for experimental stress analysis applications.
Features
Applications
| Series | SGD Series |
| Type | Precision linear pattern strain gauge |
| Nominal resistance | 350 Ω |
| Gauge pattern | Linear (single direction) |
| Measuring grid material | Etched constantan foil |
| Carrier material | Polyimide film |
| Termination | Solder Pads |
| Temperature compensation | Steel (self-temperature-compensated) |
| Active grid length x width | 0.126 x 0.098" (3.2 x 2.5 mm) |
| Carrier (matrix) length x width | 0.276 x 0.157" (7 x 4 mm) |
| Maximum bridge energizing voltage | 9.5 V rms |
| Alignment | Alignment triangles with principal-stress arrow |
| Field trimming | Carrier may be trimmed on all sides to within 0.01" (0.25 mm) of the foil grid |
| Recommended bondable terminal pad | BTP-3 |
| Adhesive | Cold or hot curing adhesives |
| Operating temperature | -103 to 392°F (-75 to 200°C) |
| Strain limit | 30,000 μm/m |
| Package quantity | Pack of 10 |
Click on a category to view a selection of compatible accessories with the Omega SGD Series Linear Strain Gauge, 350 Ω, 0.126 x 0.098" grid, solder pads, steel-compensated, 10-pack.
| Series | SGD Series |
| Type | Precision linear pattern strain gauge |
| Nominal resistance | 350 Ω |
| Gauge pattern | Linear (single direction) |
| Measuring grid material | Etched constantan foil |
| Carrier material | Polyimide film |
| Termination | Solder Pads |
| Temperature compensation | Steel (self-temperature-compensated) |
| Active grid length x width | 0.126 x 0.098" (3.2 x 2.5 mm) |
| Carrier (matrix) length x width | 0.276 x 0.157" (7 x 4 mm) |
| Maximum bridge energizing voltage | 9.5 V rms |
| Alignment | Alignment triangles with principal-stress arrow |
| Field trimming | Carrier may be trimmed on all sides to within 0.01" (0.25 mm) of the foil grid |
| Recommended bondable terminal pad | BTP-3 |
| Adhesive | Cold or hot curing adhesives |
| Operating temperature | -103 to 392°F (-75 to 200°C) |
| Strain limit | 30,000 μm/m |
| Package quantity | Pack of 10 |
Click on a category to view a selection of compatible accessories with the Omega SGD Series Linear Strain Gauge, 350 Ω, 0.126 x 0.098" grid, solder pads, steel-compensated, 10-pack.
