- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
This cartridge heater is configured for Low Density, 1000 W, 28 W/in2. It suits heat sealing equipment and molds and dies.
This cartridge heater is configured for Low Density, 1000 W, 28 W/in2. It suits heat sealing equipment and molds and dies.
The standard termination for low-density cartridge heaters is Type F, consisting of 10" (254 mm) internally connected flexible lead wires with high temperature insulation, UL approved for 300 or 600 V service and temperature rated to 482°F (482°F (250°C)). Low-density cartridge heaters are an excellent, cost effective choice without compromising quality for Original Equipment Manufacturers (OEMs) consuming large quantities of cartridge heaters for their equipment.
Features
Applications
| Series | LDC Series |
| Type | cartridge heater |
| Configuration | Low Density |
| Configuration | 1000 W |
| Configuration | 28 W/in2 |
| Supply voltage | 240 V AC |
| Configuration | 12" (30.5 cm) (L) |
| Configuration | 1" (2.5 cm) (D) |
| Configuration | 10" (25.4 cm) Lead |
| Maximum Temperature | 1200°F (649°C) |
| Maximum Watt Density | 20 to 45 W/in2 (3.1 to 7.0 W/cm2) depending on heater size and operating temperature |
| Sheath Material | Alloy 304 stainless steel |
| Fill | Specially selected grain size high purity Magnesium Oxide (MgO) |
| Wattage Tolerance | Plus 5%, minus 10% |
| Resistance Tolerance | Plus 10%, minus 5% |
| Resistance Wire | Helically wound Nickel-Chrome resistance wire, evenly stretched and strung through ceramic insulators |
| Standard Termination | Type F: 10" (254 mm) internally connected flexible lead wires with high temperature insulation, UL approved for 300 or 600 V service, temperature rated to 482°F (250°C) |
| End Seal | Sheath roll crimped over a 304 stainless steel end disc; mica spacer electrically insulates the heater core from the end disc (not moisture proof) |
| Maximum Voltage | 240 V (3/16" (4.8 mm) to 1/2" (12.7 mm) diameter); 480 V (5/8" (15.9 mm) to 1-1/4" (3.2 cm) diameter, when applicable) |
| Nominal Diameter (series range) | 3/16" (4.8 mm) to 1-1/4" (3.2 cm) |
| Length Tolerance | ±1/16" (1.59 mm) up to 6" (152 mm) long;±1/8" (3.18 mm) over 6" (152 mm) long |
| Camber Tolerance | 0.010" (0.254 mm) per foot of length |
| Approvals | UL recognized and CSA certified (UL File E65652, CSA File 043099) |
| Series | LDC Series |
| Type | cartridge heater |
| Configuration | Low Density |
| Configuration | 1000 W |
| Configuration | 28 W/in2 |
| Supply voltage | 240 V AC |
| Configuration | 12" (30.5 cm) (L) |
| Configuration | 1" (2.5 cm) (D) |
| Configuration | 10" (25.4 cm) Lead |
| Maximum Temperature | 1200°F (649°C) |
| Maximum Watt Density | 20 to 45 W/in2 (3.1 to 7.0 W/cm2) depending on heater size and operating temperature |
| Sheath Material | Alloy 304 stainless steel |
| Fill | Specially selected grain size high purity Magnesium Oxide (MgO) |
| Wattage Tolerance | Plus 5%, minus 10% |
| Resistance Tolerance | Plus 10%, minus 5% |
| Resistance Wire | Helically wound Nickel-Chrome resistance wire, evenly stretched and strung through ceramic insulators |
| Standard Termination | Type F: 10" (254 mm) internally connected flexible lead wires with high temperature insulation, UL approved for 300 or 600 V service, temperature rated to 482°F (250°C) |
| End Seal | Sheath roll crimped over a 304 stainless steel end disc; mica spacer electrically insulates the heater core from the end disc (not moisture proof) |
| Maximum Voltage | 240 V (3/16" (4.8 mm) to 1/2" (12.7 mm) diameter); 480 V (5/8" (15.9 mm) to 1-1/4" (3.2 cm) diameter, when applicable) |
| Nominal Diameter (series range) | 3/16" (4.8 mm) to 1-1/4" (3.2 cm) |
| Length Tolerance | ±1/16" (1.59 mm) up to 6" (152 mm) long;±1/8" (3.18 mm) over 6" (152 mm) long |
| Camber Tolerance | 0.010" (0.254 mm) per foot of length |
| Approvals | UL recognized and CSA certified (UL File E65652, CSA File 043099) |
