- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Image is for reference only, refer to product info for complete details.
Made for fine flow regulation, this electrically controlled proportional valve provides a 1/4" compression port, a 0.24 Cv flow coefficient and a 100:1 turndown ratio. It accepts a 0 to 5 V DC or 4 mA to 20 mA command signal on 12 V DC to 30 V DC supply. The 316 SS body with FKM seals is rated to 500 psi (34.5 bar) and 54°C (130°F). Works great for gas service.
Made for fine flow regulation, this electrically controlled proportional valve provides a 1/4" compression port, a 0.24 Cv flow coefficient and a 100:1 turndown ratio. It accepts a 0 to 5 V DC or 4 mA to 20 mA command signal on 12 V DC to 30 V DC supply. The 316 SS body with FKM seals is rated to 500 psi (34.5 bar) and 54°C (130°F). Works great for gas service.
The FSV10 Series electronic proportioning solenoid valves can control the flow of a wide variety of gases and liquids. The variable-stroke electromagnetic valve is pulsed by the driver electronics, maintaining the correct magnetic flux level in the solenoid and holding flow at the level of the analog input setpoint signal.
A TTL-level input allows the valve to be shut off regardless of analog setpoint signal. The output power level of the driver electronics is jumper selectable for cooler, more efficient operation.
These valves come with 8 inches of wire, which must be soldered to the 9-pin D connector.
Features
Applications
| Turndown ratio | 100:1 |
| Response time | 500 msec maximum |
| Fluid temperature range | 14°F to 130°F (-10°C to 54°C) |
| Typical valve surface temperature | 130°F (54°C) with 24 Vdc power input |
| Required power input (not included) | 12 Vdc to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack |
| Connection | 1/4" compression fittings |
| Setpoint input signal | 0 to 5 Vdc or 4 mA to 20 mA |
| Materials in fluid contact | 316 and 416 SS, FKM O-rings |
| Maximum pressure | 500 psig (3448 kPa) |
| Leak integrity | 1 x 10-9 sccs; helium, individually tested |
| Ambient temperature | 32°F to 122°F (0°C to 50°C) |
| CE compliance | EMC Directive 89/336/EEC EN55011:1991; Group 1, Class A EN50082-2:1995 |
| Orifice size | 0.125" (3.18 mm) |
| Cv | 0.24 |
| Maximum flow, air | 100,000 mL/min |
| Maximum flow, water | 2873 mL/min |
| Maximum flow @ maximum delta-P, air | 100,000 mL/min |
| Maximum flow @ maximum delta-P, water | 4800 mL/min |
| Maximum differential pressure | 35 psid (241 kPa) |
| Dimensions | Valve dimensions: 3.45" x 3.25" x 1.00" H x L x W (87.6 x 87.6 x 25.4 mm) including compression fittings Driver electronics: 3" x 3" x 1" W x D x H (7.62 x 7.62 x 25.4 mm) |
| Turndown ratio | 100:1 |
| Response time | 500 msec maximum |
| Fluid temperature range | 14°F to 130°F (-10°C to 54°C) |
| Typical valve surface temperature | 130°F (54°C) with 24 Vdc power input |
| Required power input (not included) | 12 Vdc to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack |
| Connection | 1/4" compression fittings |
| Setpoint input signal | 0 to 5 Vdc or 4 mA to 20 mA |
| Materials in fluid contact | 316 and 416 SS, FKM O-rings |
| Maximum pressure | 500 psig (3448 kPa) |
| Leak integrity | 1 x 10-9 sccs; helium, individually tested |
| Ambient temperature | 32°F to 122°F (0°C to 50°C) |
| CE compliance | EMC Directive 89/336/EEC EN55011:1991; Group 1, Class A EN50082-2:1995 |
| Orifice size | 0.125" (3.18 mm) |
| Cv | 0.24 |
| Maximum flow, air | 100,000 mL/min |
| Maximum flow, water | 2873 mL/min |
| Maximum flow @ maximum delta-P, air | 100,000 mL/min |
| Maximum flow @ maximum delta-P, water | 4800 mL/min |
| Maximum differential pressure | 35 psid (241 kPa) |
| Dimensions | Valve dimensions: 3.45" x 3.25" x 1.00" H x L x W (87.6 x 87.6 x 25.4 mm) including compression fittings Driver electronics: 3" x 3" x 1" W x D x H (7.62 x 7.62 x 25.4 mm) |
