- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Made for process temperature maintenance, this heater tape provides 310 W at 120 V. It has a 8.6 W/in2 watt density and a Fiberglass sheath. It is used for laboratory glassware heating.
Made for process temperature maintenance, this heater tape provides 310 W at 120 V. It has a 8.6 W/in2 watt density and a Fiberglass sheath. It is used for laboratory glassware heating.
OMEGALUX FGS, FGH and FWH high temperature heating tapes are fiberglass insulated. Standard tapes are made from fine gauge stranded resistance wires that are double insulated with braided fiberglass and knitted into flat tapes for maximum flexibility. Wide and heavy-duty insulated tapes are good for direct contact on a conductive surface.
Features
Applications
| Series | FGH Series |
| Type | Heater Tape |
| Voltage | 120 V |
| Power | 310 W |
| Watt density | 8.6 W/in2 |
| Maximum temperature | 900°F (482°C) |
| Sheath / material | Fiberglass |
| Termination | 2-Prong Molded Separable Plug |
| Insulation | Double-braided fiberglass |
| Dielectric strength | In excess of 2000 V |
| Heating element | 36-40 gauge resistance wire |
| Maximum exposure temperature | up to 896°F (480°C) |
| Thermal response | Fast Thermal Response |
| Plug | Integral Molded Separable plug |
| Heating elements | 36-40 gauge resistance wire |
| Standard insulated tapes – Heating element insulation | Double-braided fiberglass |
| Lead Wires | Emerge from opposite ends into separate sides of an integrally molded separable plug |
| Leads same end option | To order heaters with power leads exiting the same end of the tape, add suffix "-LSE" to model number |
| 240 V version | To order 240 V version change the "1" (2.5 cm) in the part no. prior to the "-" to "2" (5.1 cm) for 240 V. All 240 V versions are not supplied with plugs. |
| Dimensions | 1/2" (12.7 mm) x 6' (1.8 m) L |
| Series | FGH Series |
| Type | Heater Tape |
| Voltage | 120 V |
| Power | 310 W |
| Watt density | 8.6 W/in2 |
| Maximum temperature | 900°F (482°C) |
| Sheath / material | Fiberglass |
| Termination | 2-Prong Molded Separable Plug |
| Insulation | Double-braided fiberglass |
| Dielectric strength | In excess of 2000 V |
| Heating element | 36-40 gauge resistance wire |
| Maximum exposure temperature | up to 896°F (480°C) |
| Thermal response | Fast Thermal Response |
| Plug | Integral Molded Separable plug |
| Heating elements | 36-40 gauge resistance wire |
| Standard insulated tapes – Heating element insulation | Double-braided fiberglass |
| Lead Wires | Emerge from opposite ends into separate sides of an integrally molded separable plug |
| Leads same end option | To order heaters with power leads exiting the same end of the tape, add suffix "-LSE" to model number |
| 240 V version | To order 240 V version change the "1" (2.5 cm) in the part no. prior to the "-" to "2" (5.1 cm) for 240 V. All 240 V versions are not supplied with plugs. |
| Dimensions | 1/2" (12.7 mm) x 6' (1.8 m) L |
