Mitutoyo 468-975 Digital 3-Point Internal Micrometer Set, 100 to 200 mm

Downloads: datasheet

Features titanium-coated measuring pins that give excellent durability and impact resistance with a range of 100 to 200 mm.

The digital 3-point internal micrometer set has an interchangeable head set.

Features

They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid
Large LCD display with character height of 7.5 mm enables you to read measurements easily
With setting rings and extensions

Range:	100 to 200 mm
Digital Step:	0.001 mm
Individual Ranges:	100 to 125, 125 to 150, 150 to 175, 175 to 200 mm
Remarks:	150 mm extension
Mass:	3540 g
Accuracy:	±0.00025" (excluding quantizing error) - full contact of measuring surfaces must be established
Display:	LCD, character height 7.5 mm
Measuring Pins:	Titanium coated tungsten carbide (6 to 12 mm) Titanium coated hardened steel (12 to 200 mm) Taper: tungsten carbide
Measuring Face:	Titanium coated tungsten carbide (6 to 12 mm) Titanium coated hardened steel (12 to 200 mm) Taper: tungsten carbide
Power Supply:	1 battery SR-44
Battery Life:	Approx. 1.2 years
Zero/Abs:	Yes
Auto Power Off After 20 min. Non-Use:	Yes
Low Voltage Alarm:	Yes
Function Lock:	Yes
Hold:	Yes
2 x PRESET:	Yes
Data Output:	Yes

datasheet for the Mitutoyo 468-975 Digital 3-Point Internal Micrometer Set, 100 to 200 mm

The digital 3-point internal micrometer set has an interchangeable head set.

Features

They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid
Large LCD display with character height of 7.5 mm enables you to read measurements easily
With setting rings and extensions

Range:	100 to 200 mm
Digital Step:	0.001 mm
Individual Ranges:	100 to 125, 125 to 150, 150 to 175, 175 to 200 mm
Remarks:	150 mm extension
Mass:	3540 g
Accuracy:	±0.00025" (excluding quantizing error) - full contact of measuring surfaces must be established
Display:	LCD, character height 7.5 mm
Measuring Pins:	Titanium coated tungsten carbide (6 to 12 mm) Titanium coated hardened steel (12 to 200 mm) Taper: tungsten carbide
Measuring Face:	Titanium coated tungsten carbide (6 to 12 mm) Titanium coated hardened steel (12 to 200 mm) Taper: tungsten carbide
Power Supply:	1 battery SR-44
Battery Life:	Approx. 1.2 years
Zero/Abs:	Yes
Auto Power Off After 20 min. Non-Use:	Yes
Low Voltage Alarm:	Yes
Function Lock:	Yes
Hold:	Yes
2 x PRESET:	Yes
Data Output:	Yes