- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Designed specifically for use within the telecommunications industry. The instrument allows the user to determine the condition of the insulation of the twisted copper cable pair, which could cause problems for services such as voice, video, and data or VOIP.
Designed specifically for use within the telecommunications industry. The instrument allows the user to determine the condition of the insulation of the twisted copper cable pair, which could cause problems for services such as voice, video, and data or VOIP.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Features
Applications
The units provide for all metallic and resistive fault testing of the customers' inside premise wiring including:
By applying a test voltage, the meters will measure the leakage current through the insulation and give the results in ohms. The results can then be reviewed to determine if the premise wire or cable pair cab be used for voice grade or voice/video/data services according to the following industry standards:
In addition to the insulation resistance test, the meters allow the technician to conduct continuity tests throughout the customer's premise. Simply place a shunt strap at the location of the modem, then with the meter go to each outlet to test for continuity using the audible alert feature on the meter to determine correct wiring configurations. This feature would replace the need for a tone generator and amplifier.
| Insulation Nominal Test Voltages | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Insulation resistance range | 200 GΩ |
| Analog range | 1 GΩ full scale |
| Short Circuit Current | 2 mA +0% -50% |
| Terminal voltage | -0% +20% ±1 V |
| Test Current on Load | 1 mA at min. pass value of insulation specified in BS7671, HD384 and IEC364, 2 mA max. |
| EN61557 Operating range | 0.10 MΩ to 1.00 GΩ |
| Leakage Current | 10% ±3 digits |
| Voltage display | 3% ±3 digits ±0.5% of rated voltage |
| Power Supply | 5 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline NiMH rechargeable cells may be used |
| Battery life | 2200 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ |
| Dimensions | 220 x 92 x 50 mm (8.66 in. x 3.63 in. x 1.97 in.) |
| Weight | 590 gms (20.73 oz.), 775 gms (27.22 oz.) with boot |
Click on a category to view a selection of compatible accessories with the Megger MIT410/TC2 Insulation Resistance and Continuity Tester, LG2.
| Insulation Nominal Test Voltages | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Insulation resistance range | 200 GΩ |
| Analog range | 1 GΩ full scale |
| Short Circuit Current | 2 mA +0% -50% |
| Terminal voltage | -0% +20% ±1 V |
| Test Current on Load | 1 mA at min. pass value of insulation specified in BS7671, HD384 and IEC364, 2 mA max. |
| EN61557 Operating range | 0.10 MΩ to 1.00 GΩ |
| Leakage Current | 10% ±3 digits |
| Voltage display | 3% ±3 digits ±0.5% of rated voltage |
| Power Supply | 5 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline NiMH rechargeable cells may be used |
| Battery life | 2200 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ |
| Dimensions | 220 x 92 x 50 mm (8.66 in. x 3.63 in. x 1.97 in.) |
| Weight | 590 gms (20.73 oz.), 775 gms (27.22 oz.) with boot |
Click on a category to view a selection of compatible accessories with the Megger MIT410/TC2 Insulation Resistance and Continuity Tester, LG2.
