Megger EVT100X Offers

For EV technicians, the main benefit is speed and simplicity. The EVT100X brings the common EV safety and diagnostic tests into one handheld unit, with a straightforward interface and guided workflow rather than requiring several separate meters.

For workshops and manufacturers, the low-resistance bonding and insulation test functions help confirm that high-voltage EV systems are safe, correctly bonded, and properly insulated before a vehicle or component is returned to service. Megger specifically highlights bonding verification, insulation testing, voltage checks, temperature readings, and diode testing as key EV applications.

For reporting and compliance, the EVT100X’s Bluetooth connection means results can be streamed to CertSuite Asset, linked to vehicles, components, or test stages, reviewed in real time, stored securely, and retrieved later for audit trails, certificates, and quality records. The EVT100X can also still be used as a standalone tester without CertSuite.

Features

• Resistance range from 100 Ω up to 200 GΩ
• Supports PI, DAR, timed testing, temperature testing, and insulation resistance compensation
• Stabilised insulation test voltage accurate to -0%/+2% ±2 V, with output maintained within 0 to 2% throughout the test range to help prevent over-voltage damage to circuits or components
• Variable insulation test voltage selection from 10 V to 999 V for nonstandard test requirements, subject to the same stabilised output control
• Adjustable minimum resistance limit buzzer from 0.5 up to 1000 MΩ
• Measures DC voltage from 10 mV up to 1000 V, with DC voltage polarity indication
• Automatic resistance testing with ranges from 1 mΩ to 10 Ω and 0.01 Ω to 1.0 MΩ
• Automatic test current selection uses the preferred test current for the load resistance under test, including 200 mA testing up to 4 Ω
• Selectable automatic or manual testing with single-direction or bi-directional modes
• Bi-directional test option automatically reverses current without reconnecting test leads
• Lead resistance compensation (NULL) operates up to 10 Ω of resistance
• Adjustable maximum resistance limit buzzer from 1 to 200 Ω in 12 steps
• Meets the international requirements of IEC61010, FCC, and IC
• Safety features include live-circuit detection, test inhibit, selectable insulation test terminal lockout voltage, failed-fuse detection, and suitability for CAT III 600 V systems
• User-selectable insulation test terminal lockout voltage: 25, 30, 50, or 75 V; default is 50 V
• Full-colour graphic display
• Guard Terminal (G) provides a return path for parallel leakage currents, helping reduce errors in insulation measurements on certain applications
• Stores up to 256 results, which can be downloaded to a USB mass storage device and accessed on a PC
• Bluetooth Low Energy connectivity for live streaming and result management in CertSuite Asset

Applications

• High-voltage EV cable and connector testing
• Battery and drivetrain insulation checks
• Electrical bonding verification on vehicle structures
• DC voltage and polarity checks
• Continuity and diode testing