Maximum KIT-HAL Wind Speed Sensor for WeatherMAX and Summit Units

This wind speed sensor is made for use with select WeatherMAX and Summit units.

Cup-type	7.5in (19.05cm) swept diameter, weighs 4oz (113.4g) It generates a sine wave AC voltage proportional to windspeed. At 102mph (164.15km/h) it spins at 1800RPM, putting out 3.67V at 60Hz. Output linearly proportional down to 8mph (12.87km/h). Black Lexan housing and rotor are impervious to shock, vibration, sunlight and ice. All generators are calibrated to a master to be interchangeable. Thrust and journal bearings are both O-ring mounted, self-aligning to Beryllium copper shaft, impervious to moisture and salt air. Bearings are self-lubricating Rulon J for dimensional stability under extreme conditions.

Cup-type	7.5in (19.05cm) swept diameter, weighs 4oz (113.4g) It generates a sine wave AC voltage proportional to windspeed. At 102mph (164.15km/h) it spins at 1800RPM, putting out 3.67V at 60Hz. Output linearly proportional down to 8mph (12.87km/h). Black Lexan housing and rotor are impervious to shock, vibration, sunlight and ice. All generators are calibrated to a master to be interchangeable. Thrust and journal bearings are both O-ring mounted, self-aligning to Beryllium copper shaft, impervious to moisture and salt air. Bearings are self-lubricating Rulon J for dimensional stability under extreme conditions.