Kyoritsu 2002PA Clamp Meter, 2000A/1000V

SPECIAL!

Downloads: datasheet manual

Can measure large AC current up to 2000A. 55mm-diameter large tear drop shaped jaws.

Yes, I would like to add a Traceable Calibration Certificate (Model CERTICM1) for only $105.00 USD

Yes, I would like to add a Traceable Calibration Certificate (Model CERTICM1) for only $105.00 USD

Features

Tear-drop-shaped jaws for ease of use in crowded cable areas and other tight places
Provides a wide measuring range from 0 up to 2000A
Terminal cover to avoid the use of an incorrect terminal
Measures current variation as short as 10ms with peak-hold feature
Provides output to a chart recorder for current variation recording
Data hold function to allow easy readings in dimly lit or hard-to-read locations
Sleep feature to conserve battery power
Permits easy continuity check with a beeper
Provides a dynamic range of 4,000 counts full scale
Provides wide measuring range of voltage and resistance in autoranging
Wide frequency range from 40Hz to 1kHz (Current measuring range: (0-1500A)
Transformer jaws fitted with guard to further improve safety
Protected throughout by double or reinforced insulation

Functional Specifications
Current Ranges	20 A, 200 A, 200 A, AC RMS
Output Sensitivity (AC-coupled)	100 mV, 10 mV, 1 mV, 1 mV per A
Load Impedance	100 kΩ minimum
Accuracy	At 25°C ±1% of range (45 Hz to 65 Hz)
Linearity	10% to 100% of range ±0.2% of reading
Noise	8mV AC RMS (30 A); 2mV AC RMS (300 A, 3000 A)
Frequency Range	10 Hz to 20 kHz (-3 dB)
Phase Error	< ±1-3/4 (45 Hz to 65 Hz); ± 10 3/4 (at 20 kHz)
Position Sensitivity	With cable > 25 mm from the coupling ± 2 % of range
External Field	With Cable > 200 mm from the head ± 1 % of range
Power Supply	2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient	± 0.08% of reading per °C
General Specifications
Head Circumference	610 mm (24 in)
Head Cable Diameter	14.3 mm (0.56")
Head Bend Radius	38.1 mm (1.5")
Cable Length (head to electronics)	2 m (6.56 ft)
Output Connection	Molded 4mm safety plugs (not integrated)
Weight	180g (6.34 oz) (head); 190 g (6.70 oz) (electronics)
Safety Standards	EN 61010-1: 2001 EN 61010-2-032: 2002 EN 61010-031: 2002 600 VRMS, Category III, Pollution Degree 2
EMC Standards	EN 61326: 1998 +A1, A2, & A3
Dimensions	116 x 68.5 x 30mm (4.56 x 2.69 x 1.18")

datasheet for the Kyoritsu 2002PA Clamp Meter, 2000A/1000V manual for the Kyoritsu 2002PA Clamp Meter, 2000A/1000V manual for the Kyoritsu 2002PA Clamp Meter, 2000A/1000V

Features

Tear-drop-shaped jaws for ease of use in crowded cable areas and other tight places
Provides a wide measuring range from 0 up to 2000A
Terminal cover to avoid the use of an incorrect terminal
Measures current variation as short as 10ms with peak-hold feature
Provides output to a chart recorder for current variation recording
Data hold function to allow easy readings in dimly lit or hard-to-read locations
Sleep feature to conserve battery power
Permits easy continuity check with a beeper
Provides a dynamic range of 4,000 counts full scale
Provides wide measuring range of voltage and resistance in autoranging
Wide frequency range from 40Hz to 1kHz (Current measuring range: (0-1500A)
Transformer jaws fitted with guard to further improve safety
Protected throughout by double or reinforced insulation

Functional Specifications
Current Ranges	20 A, 200 A, 200 A, AC RMS
Output Sensitivity (AC-coupled)	100 mV, 10 mV, 1 mV, 1 mV per A
Load Impedance	100 kΩ minimum
Accuracy	At 25°C ±1% of range (45 Hz to 65 Hz)
Linearity	10% to 100% of range ±0.2% of reading
Noise	8mV AC RMS (30 A); 2mV AC RMS (300 A, 3000 A)
Frequency Range	10 Hz to 20 kHz (-3 dB)
Phase Error	< ±1-3/4 (45 Hz to 65 Hz); ± 10 3/4 (at 20 kHz)
Position Sensitivity	With cable > 25 mm from the coupling ± 2 % of range
External Field	With Cable > 200 mm from the head ± 1 % of range
Power Supply	2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient	± 0.08% of reading per °C
General Specifications
Head Circumference	610 mm (24 in)
Head Cable Diameter	14.3 mm (0.56")
Head Bend Radius	38.1 mm (1.5")
Cable Length (head to electronics)	2 m (6.56 ft)
Output Connection	Molded 4mm safety plugs (not integrated)
Weight	180g (6.34 oz) (head); 190 g (6.70 oz) (electronics)
Safety Standards	EN 61010-1: 2001 EN 61010-2-032: 2002 EN 61010-031: 2002 600 VRMS, Category III, Pollution Degree 2
EMC Standards	EN 61326: 1998 +A1, A2, & A3
Dimensions	116 x 68.5 x 30mm (4.56 x 2.69 x 1.18")

datasheet for the Kyoritsu 2002PA Clamp Meter, 2000A/1000V manual for the Kyoritsu 2002PA Clamp Meter, 2000A/1000V manual for the Kyoritsu 2002PA Clamp Meter, 2000A/1000V