Capable of doing continuity measurement, insulation measurement, loop impedance measurement, PSC / PFC measurement, RCD measurement, earth measurement, phase rotation and voltage measurement.
Capable of doing continuity measurement, insulation measurement, loop impedance measurement, PSC / PFC measurement, RCD measurement, earth measurement, phase rotation and voltage measurement.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Continuity Measurement
Continuous testing can be carried out by use of the test button lockdown feature. A selectable buzzer gives instantaneous indication of continuity. Null facility eliminates the test lead resistance from the results, the nulled value is retained even if the instrument is switched off. Live circuit warnings are given by a flashing LED, buzzer and indication on the display.
Insulation Measurement
Three selectable test voltages 250V, 500V and 1000V. An auto-discharge function ensures that circuits are not hazardous after testing. A red LED gives warning of high voltage output during testing and discharging of the circuit. In case of connecting to a live circuit, a live circuit warning is given by flashing LED, buzzer and indication on the display.
Loop Impedance Measurement
A high current alternative is selectable for even higher accuracy and instantaneous results. The subsequent test will default to the low current test, this saves any inadvertent tripping of the RCD. The KEW 6016 allows also for phase to phase loop tests.
PSC / PFC Measurement
The Prospective Short Circuit Current (PSC) and Prospective Fault Current (PFC) are automatically calculated and shown on the display. As loop testing, the function has low and high test current options with the default to low current to avoid inadvertent tripping of RCDs.
RCD Measurement
The KEW 6016 has a comprehensive RCD test feature for RCD type AC (Alternative Currents), RCD type A (Pulsating Direct Currents), General and Selective (delayed)
Measures at 1/2x, 1x, 5x of nominal RCD current. It also has Ramp Test and Auto test where all results are shown on one screen. Touch voltage limit can be selected for 25V or 50V depending on application.
Earth Measurement
Using the classical Volt-Amper method with two auxiliary earth spikes and without external power source. All test leads and spikes are supplied as standard accessories.
Phase Rotation
KEW 6016 can check the phase rotation of three phase lines with clear indication of the sequence on the display.
Voltage Measurement
In addiction to the voltage measurement, this function gives also the Frequency of the voltage under test.
Continuity | |
---|---|
Range | 20/200/2000 Ω (Auto-ranging) |
Open Circuit Voltage (DC) | 5 V ±20% |
Short Circuit Current | Greater than 200 mA |
Accuracy | ±0.1 Ω (0 - 0.19 Ω) ±2%rdg+8dgt (0.2 - 2000 Ω) |
Insulation Resistance | |
Range | 20/200 MΩ (Auto-ranging) 20/200/2000 MΩ (Auto-ranging) |
Open Circuit Voltage (DC) | 250 V +25% -0% 500 V +25% -0% 1000 V +20% -0% |
Rated current | 1 mA or greater @ 250 kΩ
1 mA or greater @ 500 kΩ 1 mA or greater @ 1 MΩ |
Accuracy | ±2%rdg+6dgt (0 - 19.99 MΩ) ±5%rdg+6dgt (20 - 200 MΩ) |
General Specifications | |
Power source | 8 x AA Batteries |
Dimensions | 5.4 x 9.3 x 4.5" (136 x 235 x 114 mm) |
Continuity | |
---|---|
Range | 20/200/2000 Ω (Auto-ranging) |
Open Circuit Voltage (DC) | 5 V ±20% |
Short Circuit Current | Greater than 200 mA |
Accuracy | ±0.1 Ω (0 - 0.19 Ω) ±2%rdg+8dgt (0.2 - 2000 Ω) |
Insulation Resistance | |
Range | 20/200 MΩ (Auto-ranging) 20/200/2000 MΩ (Auto-ranging) |
Open Circuit Voltage (DC) | 250 V +25% -0% 500 V +25% -0% 1000 V +20% -0% |
Rated current | 1 mA or greater @ 250 kΩ
1 mA or greater @ 500 kΩ 1 mA or greater @ 1 MΩ |
Accuracy | ±2%rdg+6dgt (0 - 19.99 MΩ) ±5%rdg+6dgt (20 - 200 MΩ) |
General Specifications | |
Power source | 8 x AA Batteries |
Dimensions | 5.4 x 9.3 x 4.5" (136 x 235 x 114 mm) |