Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Downloads: datasheet manual

This advanced multifunction tester can perform all the testing required by IEC 364-6-61with one single instrument.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Model: 6010B | Order No: KEW6010B

With the capability of downloading results to a PC and data logging information.

Learn More

Features

Continuity and Insulation Testing

Live circuit warning LED: Immediately notification if the circuit under test is live
Auto Discharge: Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing
Integral overload protection on internal continuity and insulation test circuitry
Autoranging
500V DC test voltage for insulation tests
200 mA short circuit current on continuity ranges

Loop and RCD Testing

Wiring connection check LED's: Immediate indication if wiring of circuit under test is correct
Overheat Protection: Rapid detection of overheating of internal circuitry, display of warning signal to user and automatic halting of measurement
Supply Voltage Indication: Can display supply voltage value in loop impedance mode
Low Current Loop Impedance Test: Short duration low test current will prevent tripping of many passive RCDs
Auto Data Hold: Retains displayed reading for set period following test
Phase Angle Selection: Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs

Continuity Testing
Measuring Ranges	20/200 Ω Autoranging
Open Circuit Voltage	4 V
Short Circuit Current	200 mA DC
Accuracy	±(3%rdg+3dgt)
Insulation Testing
Measuring Ranges	20/200 Ω Autoranging
Test Voltage	500V DC
Output Voltage on Open Circuit	570 V DC ±6%
Rated Current	1 mA
Accuracy	±(3%rdg+3dgt)
Loop Impedance Testing
Rated Voltage	230V AC ±10% @ 50 Hz
Voltage Measuring Range	100 to 250 V @ 50 Hz
Impedance Ranges	20/2000 Ω
Nominal Test Current	20 Ω Range: 24 A 2000 Ω Range: 15 mA
Accuracy	20 Ω Range: ±(3%rdg+8dgt) 2000 Ω Range: ±(3%rdg+8dgt)
RCD Testing
Rated Voltage	230V AC ±10% @ 50 Hz
Trip Current Settings	RCD x 1/2: 5, 15, 50, 150, 250 mA RCD x 1: 10, 30,100,300,500 mA RCD Fast: 150 mA
Trip Current Duration	RCD x 1/2 x 1: 2000 ms RCD fast: 40 ms
Trip Current	±3% of test current at 230 V
Trip time	±(3%rdg+3dgt)
General Specifications
Safety Standard	IEC 61010-1 CAT.Ⅲ 300V Pollution degree 2
Withstand Voltage	3700V AC for one minute

datasheet for the Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester manual for the Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Features

Continuity and Insulation Testing

Live circuit warning LED: Immediately notification if the circuit under test is live
Auto Discharge: Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing
Integral overload protection on internal continuity and insulation test circuitry
Autoranging
500V DC test voltage for insulation tests
200 mA short circuit current on continuity ranges

Loop and RCD Testing

Wiring connection check LED's: Immediate indication if wiring of circuit under test is correct
Overheat Protection: Rapid detection of overheating of internal circuitry, display of warning signal to user and automatic halting of measurement
Supply Voltage Indication: Can display supply voltage value in loop impedance mode
Low Current Loop Impedance Test: Short duration low test current will prevent tripping of many passive RCDs
Auto Data Hold: Retains displayed reading for set period following test
Phase Angle Selection: Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs

Continuity Testing
Measuring Ranges	20/200 Ω Autoranging
Open Circuit Voltage	4 V
Short Circuit Current	200 mA DC
Accuracy	±(3%rdg+3dgt)
Insulation Testing
Measuring Ranges	20/200 Ω Autoranging
Test Voltage	500V DC
Output Voltage on Open Circuit	570 V DC ±6%
Rated Current	1 mA
Accuracy	±(3%rdg+3dgt)
Loop Impedance Testing
Rated Voltage	230V AC ±10% @ 50 Hz
Voltage Measuring Range	100 to 250 V @ 50 Hz
Impedance Ranges	20/2000 Ω
Nominal Test Current	20 Ω Range: 24 A 2000 Ω Range: 15 mA
Accuracy	20 Ω Range: ±(3%rdg+8dgt) 2000 Ω Range: ±(3%rdg+8dgt)
RCD Testing
Rated Voltage	230V AC ±10% @ 50 Hz
Trip Current Settings	RCD x 1/2: 5, 15, 50, 150, 250 mA RCD x 1: 10, 30,100,300,500 mA RCD Fast: 150 mA
Trip Current Duration	RCD x 1/2 x 1: 2000 ms RCD fast: 40 ms
Trip Current	±3% of test current at 230 V
Trip time	±(3%rdg+3dgt)
General Specifications
Safety Standard	IEC 61010-1 CAT.Ⅲ 300V Pollution degree 2
Withstand Voltage	3700V AC for one minute