Klein Tools ET40 Offers

Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It features indicators for positive and negative DC polarity, and tests DC voltages as low as 1.5V. It tests AC voltages 12-240VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 x AAA batteries.

Features

• Voltage Tester for AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages
• Tests DC voltages from 1.5V to greater than 17 to 24V at four useful levels aligned with commonly used DC voltages
• Bright LEDs illuminate to indicate the type and level of voltage detected
• Built to withstand a 9.8-Foot (3 m) drop
• Indicates polarity when measuring DC voltages
• Powers off automatically after approximately 2 minutes of non-use to conserve battery life
• CATIII 250V, Class 2, Double insulation
• Ingress protection IP41 dust and water resistant
• Built-in test lead holders on sides of tester
• Low battery indicator with easily accessible battery compartment
• Important Notes: Read, understand, and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use. Before each use, verify tester operation by measuring a known voltage. Never use the tester on a circuit with voltages that exceed the category based rating of this tester. Usage of this tester in any way other than that specified by the manufacturer can impair safe operation, resulting in severe injury or death