The insulated combination pliers are designed to be used in a wide variety of general tasks including crimping, wire cutting and pipe gripping that may involve electrical hazards. They are riveted close to the cutting edge for optimal cutting power and grip strength.
The insulated combination pliers are designed to be used in a wide variety of general tasks including crimping, wire cutting and pipe gripping that may involve electrical hazards. They are riveted close to the cutting edge for optimal cutting power and grip strength.
Klein Tools Electrician's Insulated Combination Pliers are 1000V rated and VDE certified for safety on the job. The multi-color, sleek design with small thumbguards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools. These pliers feature a high-leverage design, with the rivet closer to the cutting edge for 40% greater cutting and gripping power than other pliers designs.
Features
Handle Finish | 3-Layer Insulation |
Handle Color | Orange/Gray |
Jaw Length | 1.78" (4.5 cm) |
Jaw Thickness | 0.55" (1.4 cm) |
Standard | Yes |
Knife Length | 0.711" (1.8 cm) |
Material | Induction Hardened Steel |
Insulated | Yes |
Jaw Width | 1.02" (2.6 cm) |
Overall Length | 8.71" (22.1 cm) |
Nose Type | Universal |
Joint Type | Hot-Riveted |
Type | High-Leverage Pliers |
Special Features | Integral Guards Help Prevent Hand Contact With Conductive Parts |
Application | ACSR, Screws, Nails and Most Hardened Wires |
Cut Style | Side-Cutting |
Crimps | Yes |
Cuts | Yes |
Nominal Length | 8" |
Connector Crimping | Yes |
Heavy Duty | No |
Bolt Thread Holding | No |
Standards | IEC 60900 and ASTM F1505 |
Fish Tape Pulling | No |
Weight | 1.0 lb (0.5 kg) |
Handle Finish | 3-Layer Insulation |
Handle Color | Orange/Gray |
Jaw Length | 1.78" (4.5 cm) |
Jaw Thickness | 0.55" (1.4 cm) |
Standard | Yes |
Knife Length | 0.711" (1.8 cm) |
Material | Induction Hardened Steel |
Insulated | Yes |
Jaw Width | 1.02" (2.6 cm) |
Overall Length | 8.71" (22.1 cm) |
Nose Type | Universal |
Joint Type | Hot-Riveted |
Type | High-Leverage Pliers |
Special Features | Integral Guards Help Prevent Hand Contact With Conductive Parts |
Application | ACSR, Screws, Nails and Most Hardened Wires |
Cut Style | Side-Cutting |
Crimps | Yes |
Cuts | Yes |
Nominal Length | 8" |
Connector Crimping | Yes |
Heavy Duty | No |
Bolt Thread Holding | No |
Standards | IEC 60900 and ASTM F1505 |
Fish Tape Pulling | No |
Weight | 1.0 lb (0.5 kg) |