- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.
The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.
Features
| Input | |
| Input Signal (calibrated Switchable) | 0 to 20 mA, 0 to 10 V, 0 to 5 V 4 to 20 mA, 2 to 10 V, 1 to 5 V |
| Input Resistance | Current input: ≤ 35 Ω Voltage input: ≥ 100 kΩ |
| Overload | Current input: < 50 mA Voltage input: < 30 V |
| Transmitter Supply Tx | 16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA) |
| Output I / Output II | |
| Output Signal (calibrated Switchable) | 0 to 20 mA, 0 to 10 V, 0 to 5 V 4 to 20 mA, 2 to 10 V, 1 to 5 V |
| Load | Current output: ≤ 6 V (300 Ω at 20 mA) Voltage output: ≤ 5 mA (2 kΩ at 10 V) |
| Linear Transmission Range | -1 to 110% |
| Residual Ripple | < 10 mVrms |
| General Data | |
| Transmission Error | < 0.1% full scale |
| Temperature Coefficient | < 100 ppm/K |
| Cut-Off Frequency -3 dB | -3 dB 5 kHz |
| Response Time T99 | 150 μs |
| Test Voltage | 3 kVAC, 50 Hz, 1 min. Input against Output 1 against Output 2 against power supply |
| Working Voltage (basic Insulation) | 600 VAC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 |
| Protection Against Electrical Shock | Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 VAC/DC for overvoltage category II and pollution degree 2 between all circuits. |
| Ambient Temperature | Operation: -13 to 158°F (-25 to 70°C) Transport and storage: -40 to 185°F (-40 to 85°C) |
| Power Supply | 24 VDC voltage range 16.8 to 31.2 VDC, approx. 1.4 W |
| EMC | EN 61326-1 |
| Construction | 2.44 x 3.8 x 4.21" (62 x 96.5 x 107 mm) , protection class IP 20, mounting on 1.38" (35 mm) DIN rail acc. to EN 60715 |
| Weight | Approx. 2.47 oz (70 g) |
| Input | |
| Input Signal (calibrated Switchable) | 0 to 20 mA, 0 to 10 V, 0 to 5 V 4 to 20 mA, 2 to 10 V, 1 to 5 V |
| Input Resistance | Current input: ≤ 35 Ω Voltage input: ≥ 100 kΩ |
| Overload | Current input: < 50 mA Voltage input: < 30 V |
| Transmitter Supply Tx | 16 V (open circuit voltage/short circuit current ≤ 22 V/35 mA) |
| Output I / Output II | |
| Output Signal (calibrated Switchable) | 0 to 20 mA, 0 to 10 V, 0 to 5 V 4 to 20 mA, 2 to 10 V, 1 to 5 V |
| Load | Current output: ≤ 6 V (300 Ω at 20 mA) Voltage output: ≤ 5 mA (2 kΩ at 10 V) |
| Linear Transmission Range | -1 to 110% |
| Residual Ripple | < 10 mVrms |
| General Data | |
| Transmission Error | < 0.1% full scale |
| Temperature Coefficient | < 100 ppm/K |
| Cut-Off Frequency -3 dB | -3 dB 5 kHz |
| Response Time T99 | 150 μs |
| Test Voltage | 3 kVAC, 50 Hz, 1 min. Input against Output 1 against Output 2 against power supply |
| Working Voltage (basic Insulation) | 600 VAC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 |
| Protection Against Electrical Shock | Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 VAC/DC for overvoltage category II and pollution degree 2 between all circuits. |
| Ambient Temperature | Operation: -13 to 158°F (-25 to 70°C) Transport and storage: -40 to 185°F (-40 to 85°C) |
| Power Supply | 24 VDC voltage range 16.8 to 31.2 VDC, approx. 1.4 W |
| EMC | EN 61326-1 |
| Construction | 2.44 x 3.8 x 4.21" (62 x 96.5 x 107 mm) , protection class IP 20, mounting on 1.38" (35 mm) DIN rail acc. to EN 60715 |
| Weight | Approx. 2.47 oz (70 g) |
