IMADA DID-4A Torque Tester

Model: DID-4A

Be the first to review this product

Downloads: datasheet manual

More IMADA Products

Ask an Expert

IMADA DID-4A Torque Tester

Model: DID-4A

Be the first to review this product

Has CW, CCW ratchet and fixed operation. Includes 2-1/4" Phillips tip, AC charger and carrying case. Has a capacity of: 2.0 to 560.0 ozf-in/0.20 to 35.00 lbf-oz/0.20 to 40.00 kgf-cm/1.0 to 400.0 N-cm/0.20 to 4.000 N-m.

Your Price	$807.00 USD
Availability	1 Week
Quantity	Quantity

IMADA DID-4A Offers

Features

Digital torque screwdriver features an integral LCD display
Designed for screw tightening torque verification
Programmable screw tightening counter identifies miss-tightening and/or defective screws
Programmable High/Low setpoints with both audible beep and green/red LED indicator light for uniform torque tightening or Go/No Go testing
Measures in Peak, Real Time, Peak Down and Continuous Out-put measuring modes (selectable)
Selectable measuring units: ozf-in, lbf-in, kgf-cm, N-cm and N-m
Statistics: Max, Min, Avg and number of data points
800 data points of memory capacity
USB data output
Programmable Auto Zero function resets unit to zero
Operates on internal NiCad batteries which provide 8 hours of continuous use
Auto shut-off after 10 minutes of inactivity

IMADA DID-4A Specifications

Measuring Range	0.030～4 N･m, 0.30～40 kgf・cm, 0.30～35 lbf・in
Accuracy	±0.5％(499 or less digit±3digit)
Display	The 4 figures digital display of LCD
The measurement direction	CW-CCW (right and left)
Data memory counts	800 data / ten channels data
Data output	ASCII format (baud rate 19200)
Auto Clear Time	If the set-up time comes, measurement value will be automatically cleared in 0.0~3.0 seconds (0.5s interval)
Setup of count	1 to 99 count (count in a clockwise direction)
Power supply	Ni-MH chargeable battery 1.2V×4cells 800mAh
Charge time / use time	Charge about 3 hour /, continuation about 12-hour use
Auto-power-off	After the neglect during 10 minutes
Bit / Socket part	HEX6.35

Click here for complete specifications on the IMADA DID-4A

What's included with the IMADA DID-4A

Torque Screwdriver
AC Charger
1/4″ Female Square to 1/4″ Hex Adapter
2 x 1/4″ Phillips Tips

Digital Torque Screwdrivers

datasheet for the IMADA DID-4A Torque Tester manual for the IMADA DID-4A Torque Tester

Ask a question about IMADA DID-4A Torque Tester

Customer Reviews for the IMADA DID-4A

Description ➕➖

IMADA DID-4A Offers

Features

Digital torque screwdriver features an integral LCD display
Designed for screw tightening torque verification
Programmable screw tightening counter identifies miss-tightening and/or defective screws
Programmable High/Low setpoints with both audible beep and green/red LED indicator light for uniform torque tightening or Go/No Go testing
Measures in Peak, Real Time, Peak Down and Continuous Out-put measuring modes (selectable)
Selectable measuring units: ozf-in, lbf-in, kgf-cm, N-cm and N-m
Statistics: Max, Min, Avg and number of data points
800 data points of memory capacity
USB data output
Programmable Auto Zero function resets unit to zero
Operates on internal NiCad batteries which provide 8 hours of continuous use
Auto shut-off after 10 minutes of inactivity

Specifications ➕➖

IMADA DID-4A Specifications

Measuring Range	0.030～4 N･m, 0.30～40 kgf・cm, 0.30～35 lbf・in
Accuracy	±0.5％(499 or less digit±3digit)
Display	The 4 figures digital display of LCD
The measurement direction	CW-CCW (right and left)
Data memory counts	800 data / ten channels data
Data output	ASCII format (baud rate 19200)
Auto Clear Time	If the set-up time comes, measurement value will be automatically cleared in 0.0~3.0 seconds (0.5s interval)
Setup of count	1 to 99 count (count in a clockwise direction)
Power supply	Ni-MH chargeable battery 1.2V×4cells 800mAh
Charge time / use time	Charge about 3 hour /, continuation about 12-hour use
Auto-power-off	After the neglect during 10 minutes
Bit / Socket part	HEX6.35