Honeywell BW CPD-HHP Handheld Gas Sampling Pump for BW Flex 4, Flex 5, BW Clip 4 and BW Solo

Model: CPD-HHP

Honeywell BW CPD-HHP Handheld Gas Sampling Pump for BW Flex 4, Flex 5, BW Clip 4 and BW Solo

Model: CPD-HHP

Designed for remote gas sampling, this handheld pump draws samples from up to 147' (45 m) at a nominal 450 cc/min. It connects to Flex 4, Flex 5, BW Clip 4 and BW Solo detectors using the flow adaptor supplied with the detector.

Designed for remote gas sampling, this handheld pump draws samples from up to 147' (45 m) at a nominal 450 cc/min. It connects to Flex 4, Flex 5, BW Clip 4 and BW Solo detectors using the flow adaptor supplied with the detector.

Your Price $630.00 USD
Availability 2 to 3 Weeks
Quantity

BW CPD-HHP Offers

Features

  • Clip-on design: attaches in line to Flex 4, Flex 5, BW Clip 4 and BW Solo detectors using the flow adaptor supplied with the detector
  • Remote sampling: draws samples from up to 147' (45 m) at a nominal 450 ± 50 cc/min
  • Single-button operation: on/off, fault acknowledge and reset, with status and power LEDs and a 95 dB audible alarm
  • Low flow alarm: alerts when flow drops to 375 ± 25 cc/min
  • Rechargeable LiPo battery: over 24 hours of run time with a 4 to 6 hour fast charge
  • Quick-connect fittings: swap hard probes or tubing as sampling needs change
  • Tubing choice: PU tubing for standard gases, PTFE-lined tubing for exotic gases
  • Mounting bracket: single- or two-handed use, left or right hand
  • Built-in filtration: replaceable coarse dust and water-impermeable filters
  • IP66/68 housing: withstands heavy weather and recovers from immersion

Applications

  • Confined space pre-entry checks
  • Spot checks and intermittent remote sampling
  • Clearing and extended sampling
  • Exotic gas sampling with PTFE-lined tubing

BW CPD-HHP Specifications

Flow Rate 450 ± 50 cc/min (nominal)
Low Flow Alarm 375 ± 25 cc/min
Sampling Distance Up to 147' (45 m)
Compatible Detectors Flex 4, Flex 5 Series, BW Clip 4, BW Solo (with the detector's flow adaptor)
Controls Single push button: on/off, acknowledge fault, reset fault
Alarms and Indicators Status LED: green all OK, red with audible alarm for low flow/fault
Power LED: amber recharge, green charged
Audible: 95 dB at 11.8" (30 cm)
Battery Rechargeable LiPo, 4 to 6 hour fast charge
Run Time Over 24 hours (tested new at 68°F (20°C)); reduced by battery age, low temperature and sample line length
Temperature -4 to 140°F (-20 to 60°C); operating range depends on the detector
Ingress Protection IP66, IP68 (not recommended for condensing atmospheres)
Sample Tubing Inside diameter: 1/8 to 3/16" (3.0 to 4.5 mm)
Outside diameter: 1/4" (6 mm) nominal
PU for standard gases, PTFE-lined for exotic gases
Dimensions 2.1 x 1.4 x 6.3" (53 x 36 x 160 mm)
Weight Pump only: 0.46 lb (209 g)
Packaged: 0.8 lb (357 g)
Warranty 2 years
Click here for complete specifications on the BW CPD-HHP

What's included with the BW CPD-HHP

  • Handheld pump
  • Detector mounting bracket with screws
  • Short hard probe with quick-connect fitting, 9" (220 mm), not for exotic gases
  • 5 sets of spare filters (coarse and membrane)
  • 2 spare quick-connect fittings
  • USB-A charger
  • Quick start guide
  • 2-year warranty

Click on a category to view a selection of compatible accessories with the Honeywell BW CPD-HHP Handheld Gas Sampling Pump for BW Flex 4, Flex 5, BW Clip 4 and BW Solo.

BW GA-CPROB1 Collapsible Sample Probe with Handle for GasAlert, Tygon Hose, 3.3ft (1m) GA-CPROB1
Collapsible aluminum sample probe with handle (3.3 ft. / 1 m) and tygon hose (1/8 in. I.D., 1/4 in. O.D.)




BW GA-CPROB2 Collapsible Sample Probe with Handle for GasAlert, Tygon Hose, 6ft (1.8m) GA-CPROB2
Collapsible aluminum sample probe with handle (6 ft. / 1.8 m) and tygon hose (1/8 in. I.D., 1/4 in. O.D.)




BW GA-PROB1-1 Sample probe for GasAlertQuattro, 1ft (0.3m) GA-PROB1-1
Sample probe (1ft/0.3 m) with hydrophobic and particulate filters for use with GasAlertQuattro gas detectors.




BW HOSE1-10 Sampling hose (10 ft. / 3 m) kit HOSE1-10
Sampling hose (10ft/3m) kit with connectors and 3 particulate filters.




BW HOSE1-20 Sampling hose (20 ft. / 6.1 m) kit HOSE1-20
Sampling hose (20ft/6.1m) kit with connectors and 3 particulate filters.




BW HOSE1-65 Sampling hose (65 ft. / 19.8 m) kit HOSE1-65
Sampling hose (65ft/19.8m) kit with connectors and 3 particulate filters.




BW HOSE2-10 Sampling hose (10 ft. / 3 m) kit -Teflon lined for reactive gases HOSE2-10
Sampling hose (10ft/3m) kit, Teflon lined for reactive gases. With connectors and 3 particulate filters.




BW HOSE2-20 Sampling hose (20 ft. / 6.1 m) kit -Teflon lined for reactive gases HOSE2-20
Sampling hose (20ft/6.1m) kit, Teflon lined for reactive gases. With connectors and 3 particulate filters.




BW HOSE2-65 Sampling hose (65 ft. / 19.8 m) kit -Teflon lined for reactive gases HOSE2-65
Sampling hose (65ft/19.8 m) kit, Teflon lined for reactive gases. With connectors and 3 particulate filters.










Ask a question about Honeywell BW CPD-HHP Handheld Gas Sampling Pump for BW Flex 4, Flex 5, BW Clip 4 and BW Solo

Customer Reviews for the BW CPD-HHP

BW CPD-HHP Offers

Features

  • Clip-on design: attaches in line to Flex 4, Flex 5, BW Clip 4 and BW Solo detectors using the flow adaptor supplied with the detector
  • Remote sampling: draws samples from up to 147' (45 m) at a nominal 450 ± 50 cc/min
  • Single-button operation: on/off, fault acknowledge and reset, with status and power LEDs and a 95 dB audible alarm
  • Low flow alarm: alerts when flow drops to 375 ± 25 cc/min
  • Rechargeable LiPo battery: over 24 hours of run time with a 4 to 6 hour fast charge
  • Quick-connect fittings: swap hard probes or tubing as sampling needs change
  • Tubing choice: PU tubing for standard gases, PTFE-lined tubing for exotic gases
  • Mounting bracket: single- or two-handed use, left or right hand
  • Built-in filtration: replaceable coarse dust and water-impermeable filters
  • IP66/68 housing: withstands heavy weather and recovers from immersion

Applications

  • Confined space pre-entry checks
  • Spot checks and intermittent remote sampling
  • Clearing and extended sampling
  • Exotic gas sampling with PTFE-lined tubing

BW CPD-HHP Specifications

Flow Rate 450 ± 50 cc/min (nominal)
Low Flow Alarm 375 ± 25 cc/min
Sampling Distance Up to 147' (45 m)
Compatible Detectors Flex 4, Flex 5 Series, BW Clip 4, BW Solo (with the detector's flow adaptor)
Controls Single push button: on/off, acknowledge fault, reset fault
Alarms and Indicators Status LED: green all OK, red with audible alarm for low flow/fault
Power LED: amber recharge, green charged
Audible: 95 dB at 11.8" (30 cm)
Battery Rechargeable LiPo, 4 to 6 hour fast charge
Run Time Over 24 hours (tested new at 68°F (20°C)); reduced by battery age, low temperature and sample line length
Temperature -4 to 140°F (-20 to 60°C); operating range depends on the detector
Ingress Protection IP66, IP68 (not recommended for condensing atmospheres)
Sample Tubing Inside diameter: 1/8 to 3/16" (3.0 to 4.5 mm)
Outside diameter: 1/4" (6 mm) nominal
PU for standard gases, PTFE-lined for exotic gases
Dimensions 2.1 x 1.4 x 6.3" (53 x 36 x 160 mm)
Weight Pump only: 0.46 lb (209 g)
Packaged: 0.8 lb (357 g)
Warranty 2 years
Click here for complete specifications on the BW CPD-HHP

What's included with the BW CPD-HHP

  • Handheld pump
  • Detector mounting bracket with screws
  • Short hard probe with quick-connect fitting, 9" (220 mm), not for exotic gases
  • 5 sets of spare filters (coarse and membrane)
  • 2 spare quick-connect fittings
  • USB-A charger
  • Quick start guide
  • 2-year warranty

Click on a category to view a selection of compatible accessories with the Honeywell BW CPD-HHP Handheld Gas Sampling Pump for BW Flex 4, Flex 5, BW Clip 4 and BW Solo.

BW GA-CPROB1 Collapsible Sample Probe with Handle for GasAlert, Tygon Hose, 3.3ft (1m) GA-CPROB1
Collapsible aluminum sample probe with handle (3.3 ft. / 1 m) and tygon hose (1/8 in. I.D., 1/4 in. O.D.)




BW GA-CPROB2 Collapsible Sample Probe with Handle for GasAlert, Tygon Hose, 6ft (1.8m) GA-CPROB2
Collapsible aluminum sample probe with handle (6 ft. / 1.8 m) and tygon hose (1/8 in. I.D., 1/4 in. O.D.)




BW GA-PROB1-1 Sample probe for GasAlertQuattro, 1ft (0.3m) GA-PROB1-1
Sample probe (1ft/0.3 m) with hydrophobic and particulate filters for use with GasAlertQuattro gas detectors.




BW HOSE1-10 Sampling hose (10 ft. / 3 m) kit HOSE1-10
Sampling hose (10ft/3m) kit with connectors and 3 particulate filters.




BW HOSE1-20 Sampling hose (20 ft. / 6.1 m) kit HOSE1-20
Sampling hose (20ft/6.1m) kit with connectors and 3 particulate filters.




BW HOSE1-65 Sampling hose (65 ft. / 19.8 m) kit HOSE1-65
Sampling hose (65ft/19.8m) kit with connectors and 3 particulate filters.




BW HOSE2-10 Sampling hose (10 ft. / 3 m) kit -Teflon lined for reactive gases HOSE2-10
Sampling hose (10ft/3m) kit, Teflon lined for reactive gases. With connectors and 3 particulate filters.




BW HOSE2-20 Sampling hose (20 ft. / 6.1 m) kit -Teflon lined for reactive gases HOSE2-20
Sampling hose (20ft/6.1m) kit, Teflon lined for reactive gases. With connectors and 3 particulate filters.




BW HOSE2-65 Sampling hose (65 ft. / 19.8 m) kit -Teflon lined for reactive gases HOSE2-65
Sampling hose (65ft/19.8 m) kit, Teflon lined for reactive gases. With connectors and 3 particulate filters.










Ask a question about Honeywell BW CPD-HHP Handheld Gas Sampling Pump for BW Flex 4, Flex 5, BW Clip 4 and BW Solo

Customer Reviews for the BW CPD-HHP

More BW Products