Hioki PD3259 Non Contact Digital Phase Detector

Downloads: datasheet

Digital Phase Rotation Meter with Three-Phase Voltage Measurement Functionality

Discontinued!

This product has been discontinued and is no longer available.

There is no direct replacement, however we recommend the:

Model: PD3259-90

For use with the digital phase detector with a wireless adapter.

Learn More

Not what you're looking for? Let’s do a search and help you find what you need.

PD3259 Digital Phase Detector lets you to measure three-phase voltage and detect phase sequence simultaneously.

Features

World's first non-metallic contact voltage detection and testing
Simply clip onto wire insulation
Phase detection check and line-to-line voltage inspection at the same time
Easy and intuitive phase detection check with backlight and buzzer
Ideal for work certification photos, offering simultaneous display of phase sequence and 3-phase voltage
Magnetic base allows the instrument to be secured on a distribution panel

Specifications:

Positive phase, negative phase (Three-phase 3-wire, Three-phase 4-wire), open phase, prediction of ground phase (Three-phase 3-wire)
Voltage measurement accuracy: ±2.0% rdg. ±8 dgt.
Frequency measurement accuracy: ±0.5% rdg. ±1 dgt.
Response time: 3 s or less, Display update rate: 500 ms
Covered cables, Metal portions *Use on shielded cables not supported
Three-phase 90.0 to 520.0 V AC (45 to 66 Hz)
600 V AC (CAT IV)
Main unit (excluding voltage sensors): IP54 (EN60529) dustproof and waterproof
Hold function, Backlight, Buzzer, Auto power-off, Low battery warning, Drop proof (on concrete, 1 m/ 1 time)
AA alkaline batteries (LR6) ×4, Maximum rated power: 3 VA, Continuous operating time: 5 hours (Backlight off, standby state)
84 mm (3.31 in)W × 146 mm (5.75 in)H × 46 mm (1.81 in)D, 590 g (20.8 oz, including batteries), cord length: 0.5 m (1.64 ft)
AA alkaline batteries (LR6) ×4, Instruction manual ×1, Carrying case C0203 ×1, Spiral tubes (black ×1, red ×2, blue ×2, yellow ×2)

datasheet for the Hioki PD3259 Non Contact Digital Phase Detector

PD3259 Digital Phase Detector lets you to measure three-phase voltage and detect phase sequence simultaneously.

Features

World's first non-metallic contact voltage detection and testing
Simply clip onto wire insulation
Phase detection check and line-to-line voltage inspection at the same time
Easy and intuitive phase detection check with backlight and buzzer
Ideal for work certification photos, offering simultaneous display of phase sequence and 3-phase voltage
Magnetic base allows the instrument to be secured on a distribution panel

Specifications:

Positive phase, negative phase (Three-phase 3-wire, Three-phase 4-wire), open phase, prediction of ground phase (Three-phase 3-wire)
Voltage measurement accuracy: ±2.0% rdg. ±8 dgt.
Frequency measurement accuracy: ±0.5% rdg. ±1 dgt.
Response time: 3 s or less, Display update rate: 500 ms
Covered cables, Metal portions *Use on shielded cables not supported
Three-phase 90.0 to 520.0 V AC (45 to 66 Hz)
600 V AC (CAT IV)
Main unit (excluding voltage sensors): IP54 (EN60529) dustproof and waterproof
Hold function, Backlight, Buzzer, Auto power-off, Low battery warning, Drop proof (on concrete, 1 m/ 1 time)
AA alkaline batteries (LR6) ×4, Maximum rated power: 3 VA, Continuous operating time: 5 hours (Backlight off, standby state)
84 mm (3.31 in)W × 146 mm (5.75 in)H × 46 mm (1.81 in)D, 590 g (20.8 oz, including batteries), cord length: 0.5 m (1.64 ft)
AA alkaline batteries (LR6) ×4, Instruction manual ×1, Carrying case C0203 ×1, Spiral tubes (black ×1, red ×2, blue ×2, yellow ×2)