Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws

Model: FT6380

Be the first to review this product

Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws-

Downloads: datasheet manual

More Hioki Products

Ask an Expert

Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws

Model: FT6380

Be the first to review this product

The clamp on earth tester measures grounding resistance by clamping to multiple grounded ground wires. It also provides AC current measurement and can measure currents ranging from leakage current of several mA to load currents of up to 60 A.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

AEMC 2137.90 Power Adapter for the PEL 102 and 103

Model: 2137.90

A power adapter for the AEMC PEL 102 and 103.

Learn More

Hioki FT6380 Offers

Get things done with this super slim jaw clamp on meter from Hioki.

Easy Clamping - open jaws easily with just two fingers. Only half the power is needed compared to typical clamp earth testers
Clamp at the Narrowest Point - Now you can easily clamp the earth cable on the pole without digging. The dramatically slim 0.79" jaws let you finish your job easily and efficiently.
Quick Start - No wait time after powering on. Start measuring instantly without zero-calibation
High Accuracy and Repeatability - Well-designed magnetic shields eliminate the leakage flux between the two cores that often affect measurement accuarcy.
Alarm Function - Set the alarm to audibly and visually notify you that the resistance or current value exceeds the thresholds.
LCD with back light - With the bright back light, you can easily read the measurement value even in dark locations
Large Storage Capacity - You can store up to 2000 measurement values in the field and recall them in your office later
Filter function enables even more accurate measurements: Resistant mode filter: digital filter gives you steadier readings. Current mode filter: Low-pass filter eliminates harmonics current over 180 Hz

Hioki FT6380 Specifications

Measurement Principle	Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
Earthing Resistance Range	0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, Accuracy: ±1.5% rdg. ±0.02 Ω
AC Current Range	20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, Accuracy: ±2.0% rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
Maximum Allowable Input	100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency)
Maximum Rated Voltage to Earth	600 V AC CAT IV
Memory Function	2000 data
Alarm Function	For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold
Display	Digital LCD, maximum 2000 dgt., Display refresh rate: 500 ms (2 times/s)
Waterproof and Dustproof	IP40 (EN60529) with clamp sensor closed
Power Supply	LR6 (AA) alkaline battery ×2, maximum rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions)
Core Jaw Diameter	Φ 1.26" (32 mm)
Dimensions	2.87 x 8.58 x 1.69" (73 x 218 x 43 mm)
Weight	21.9 oz (620 g)

Click here for complete specifications on the Hioki FT6380

What's included with the Hioki FT6380

Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws

datasheet for the Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws manual for the Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws

Ask a question about Hioki FT6380 Clamp On Earth Ground Resistance Tester with super slim jaws

Customer Reviews for the Hioki FT6380

Description ➕➖

Hioki FT6380 Offers

Get things done with this super slim jaw clamp on meter from Hioki.

Easy Clamping - open jaws easily with just two fingers. Only half the power is needed compared to typical clamp earth testers
Clamp at the Narrowest Point - Now you can easily clamp the earth cable on the pole without digging. The dramatically slim 0.79" jaws let you finish your job easily and efficiently.
Quick Start - No wait time after powering on. Start measuring instantly without zero-calibation
High Accuracy and Repeatability - Well-designed magnetic shields eliminate the leakage flux between the two cores that often affect measurement accuarcy.
Alarm Function - Set the alarm to audibly and visually notify you that the resistance or current value exceeds the thresholds.
LCD with back light - With the bright back light, you can easily read the measurement value even in dark locations
Large Storage Capacity - You can store up to 2000 measurement values in the field and recall them in your office later
Filter function enables even more accurate measurements: Resistant mode filter: digital filter gives you steadier readings. Current mode filter: Low-pass filter eliminates harmonics current over 180 Hz

Specifications ➕➖

Hioki FT6380 Specifications

Measurement Principle	Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
Earthing Resistance Range	0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, Accuracy: ±1.5% rdg. ±0.02 Ω
AC Current Range	20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, Accuracy: ±2.0% rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
Maximum Allowable Input	100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency)
Maximum Rated Voltage to Earth	600 V AC CAT IV
Memory Function	2000 data
Alarm Function	For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold
Display	Digital LCD, maximum 2000 dgt., Display refresh rate: 500 ms (2 times/s)
Waterproof and Dustproof	IP40 (EN60529) with clamp sensor closed
Power Supply	LR6 (AA) alkaline battery ×2, maximum rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions)
Core Jaw Diameter	Φ 1.26" (32 mm)
Dimensions	2.87 x 8.58 x 1.69" (73 x 218 x 43 mm)
Weight	21.9 oz (620 g)