GPI 113255-3 (01A12LM) 1" ISO Aluminum Fuel Flow Meter, 10-100 LPM

Downloads: datasheet manual

Compact and lightweight, this meter is designed for use on a hose. 10 to 100 LPM, NPT thread, and two totals (accumulative and batch).

Compact, lightweight, and easy to use, it weighs just 12 oz
Aluminum housing for rust-resistant performance
Meter may be installed in-line either horizontally or vertically, or at the end of the hose adjacent to the nozzle
When installed and used correctly, inaccuracies of no greater than +5% will be obtained
Designed to be virtually maintenance-free when used properly
Features large 4-digit LCD display for easy readings of 10 to 100 LPM
Tested and approved for kerosene, diesel (biodiesel blends B20) or gasoline (ethanol blends E15)
1" (2.54 cm) ISO threads included
Can provide cumulative and batch totals
Features an operating temperature range of 14 to 130°F (-10 to 54°C)
Manual or automatic on
Automatic off

Ideal for the following applications: Large Fleet Truck Stations, Organizations, and Construction Sites.

Inner Diameter	1' (30 cm)
Design Type	Turbine
Fitting	ISO
Accuracy	±5.0%
Repeatability	±0.5%
Flow Range	3 to 30 GPM 10 to 100 LPM
Operating Temperature	14 to 130°F (-10 to 54°C)
Display	LCD
Reads	Litres
Electronic Choice	2 x Totals (local)
Powered By	2 x AAA Batteries
Pressure Rating	300 PSI, 21 bar
Wetted Materials	Aluminum Housing, Nylon, Rotor, Ceramic Bearings, Tungsten Carbide Shaft, 316 Stainless Steel Rings
To Use With	Biodeisel (B100) Diesel Fuel (up to 20% biodiesel blends) Gasoline (up to 15% alcohol blends) Kerosene
Do Not Use With	Water or chemicals
Warranty	2 Years

datasheet for the GPI 113255-3 (01A12LM) 1" ISO Aluminum Fuel Flow Meter, 10-100 LPM manual for the GPI 113255-3 (01A12LM) 1" ISO Aluminum Fuel Flow Meter, 10-100 LPM

Compact, lightweight, and easy to use, it weighs just 12 oz
Aluminum housing for rust-resistant performance
Meter may be installed in-line either horizontally or vertically, or at the end of the hose adjacent to the nozzle
When installed and used correctly, inaccuracies of no greater than +5% will be obtained
Designed to be virtually maintenance-free when used properly
Features large 4-digit LCD display for easy readings of 10 to 100 LPM
Tested and approved for kerosene, diesel (biodiesel blends B20) or gasoline (ethanol blends E15)
1" (2.54 cm) ISO threads included
Can provide cumulative and batch totals
Features an operating temperature range of 14 to 130°F (-10 to 54°C)
Manual or automatic on
Automatic off

Ideal for the following applications: Large Fleet Truck Stations, Organizations, and Construction Sites.

Inner Diameter	1' (30 cm)
Design Type	Turbine
Fitting	ISO
Accuracy	±5.0%
Repeatability	±0.5%
Flow Range	3 to 30 GPM 10 to 100 LPM
Operating Temperature	14 to 130°F (-10 to 54°C)
Display	LCD
Reads	Litres
Electronic Choice	2 x Totals (local)
Powered By	2 x AAA Batteries
Pressure Rating	300 PSI, 21 bar
Wetted Materials	Aluminum Housing, Nylon, Rotor, Ceramic Bearings, Tungsten Carbide Shaft, 316 Stainless Steel Rings
To Use With	Biodeisel (B100) Diesel Fuel (up to 20% biodiesel blends) Gasoline (up to 15% alcohol blends) Kerosene
Do Not Use With	Water or chemicals
Warranty	2 Years