Fluke Networks TS22A test set with piercing pin clips

Model: 22801001 | UPC: 754082038467

Fluke Networks TS22A test set with piercing pin clips

Model: 22801001 | UPC: 754082038467

Discontinued!

This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:

Visit our Training and Test Kits category for similar products.

Or let's do a search and help you find what you need:


Fluke Networks 22801001 TS22A TEST SET WITH PIERCING PIN CLIPS

Features


Combining reliability, durability and expanded utility

The TS®22 Series Test Sets top features include:

  • Tone (DTMF) and pulse operation
  • Last number redial
  • DTMF signal levels compensated for loop length
  • DropSafe™ unit up to 20 feet
  • Audible electronic ringer
  • Locking mute switch
  • 3-year redial storage time
  • Over voltage and over current protection
  • PBX pause button
  • Field replaceable belt clip
  • Continuous polarity LED indications
  • For use with computerized voice response systems
  • Stores nine 18-digit numbers in repertory dialer (speed dialing)
  • RainSafe™ ruggedness for use in extreme weather conditions
  • TS22A includes above and additionally high impedance monitor for DataSafe™ operation and two-way speakerphone

Fluke Networks TS 22 Series Specifications

Electrical
Loop Limit 2 kΩ maximum at 48 VDC (nominal 20 mA minimum loop current)
DC Resistance
(Talk Mode)
300 Ω typical
Monitor Impedance
TS22 5 kΩ nominal at 1 kHz
TS22A 120 kΩ nominal at 1 kHz
Rotary Dial Output
Pulsing Rate 10 pps ±5 pps
Percent Break 61 % ± 2 %
Interdigit Interval 1000 ms typical
Leakage During Break >50 kΩ
DTMF Output
Tone ±1% maximum
Frequency Error Tone Level -3 dBm combined (typical)
High versus Low Tone Difference 4 dB maximum
Monitor Amplifier 9 V battery; provides 25 hours
Power Source continuous use, typical
Speaker Levels for TS22 Low, medium, high and off
Automatic Power Shut Off After 5 min. of no audio signal
Speakerphone Levels TS22A Low, medium, high and off
Power Source Shared line and battery power
Physical
Physical Measurement 10.25 in x 2.69 in x 3.38 in (26 cm x 6.83 cm x 8.57 cm)
Weight
TS22 21 ounces (.595 kg)
TS22A 22 ounces (.624 kg) typical
Environmental
Temperature Operating: 29 to 140°F (-34 to 60°C)
Storage -40 to 150°F (-40 to 66°C)
Altitude To 10,000 feet (3,000 meters)
Relative Humidity 5 % to 95 %
Certifications and Compliance Conformité Européenne. Conforms to relevant European Union directives.
* Contains an embedded 3 V lithium battery. The 9 V battery in the test set should be changed when low, or once a year if not in use, to prevent the 3 V battery from draining. A 3 V battery that drains after its 42-month warranty will need to be replaced by an authorized service facility at a charge to you.
* Note also that your speakerphone will no longer work when your 9 V battery is low or dead. You should replace the 9 V battery whenever it is low.

What's included with the Fluke Networks 22801001

  • Fluke Networks TS22A test set with piercing pin clips

Ask a question about Fluke Networks TS22A test set with piercing pin clips

Customer Reviews for the Fluke Networks 22801001

Fluke Networks 22801001 TS22A TEST SET WITH PIERCING PIN CLIPS

Features


Combining reliability, durability and expanded utility

The TS®22 Series Test Sets top features include:

  • Tone (DTMF) and pulse operation
  • Last number redial
  • DTMF signal levels compensated for loop length
  • DropSafe™ unit up to 20 feet
  • Audible electronic ringer
  • Locking mute switch
  • 3-year redial storage time
  • Over voltage and over current protection
  • PBX pause button
  • Field replaceable belt clip
  • Continuous polarity LED indications
  • For use with computerized voice response systems
  • Stores nine 18-digit numbers in repertory dialer (speed dialing)
  • RainSafe™ ruggedness for use in extreme weather conditions
  • TS22A includes above and additionally high impedance monitor for DataSafe™ operation and two-way speakerphone

Fluke Networks TS 22 Series Specifications

Electrical
Loop Limit 2 kΩ maximum at 48 VDC (nominal 20 mA minimum loop current)
DC Resistance
(Talk Mode)
300 Ω typical
Monitor Impedance
TS22 5 kΩ nominal at 1 kHz
TS22A 120 kΩ nominal at 1 kHz
Rotary Dial Output
Pulsing Rate 10 pps ±5 pps
Percent Break 61 % ± 2 %
Interdigit Interval 1000 ms typical
Leakage During Break >50 kΩ
DTMF Output
Tone ±1% maximum
Frequency Error Tone Level -3 dBm combined (typical)
High versus Low Tone Difference 4 dB maximum
Monitor Amplifier 9 V battery; provides 25 hours
Power Source continuous use, typical
Speaker Levels for TS22 Low, medium, high and off
Automatic Power Shut Off After 5 min. of no audio signal
Speakerphone Levels TS22A Low, medium, high and off
Power Source Shared line and battery power
Physical
Physical Measurement 10.25 in x 2.69 in x 3.38 in (26 cm x 6.83 cm x 8.57 cm)
Weight
TS22 21 ounces (.595 kg)
TS22A 22 ounces (.624 kg) typical
Environmental
Temperature Operating: 29 to 140°F (-34 to 60°C)
Storage -40 to 150°F (-40 to 66°C)
Altitude To 10,000 feet (3,000 meters)
Relative Humidity 5 % to 95 %
Certifications and Compliance Conformité Européenne. Conforms to relevant European Union directives.
* Contains an embedded 3 V lithium battery. The 9 V battery in the test set should be changed when low, or once a year if not in use, to prevent the 3 V battery from draining. A 3 V battery that drains after its 42-month warranty will need to be replaced by an authorized service facility at a charge to you.
* Note also that your speakerphone will no longer work when your 9 V battery is low or dead. You should replace the 9 V battery whenever it is low.

What's included with the Fluke Networks 22801001

  • Fluke Networks TS22A test set with piercing pin clips

Ask a question about Fluke Networks TS22A test set with piercing pin clips

Customer Reviews for the Fluke Networks 22801001

More Fluke Networks Products