Customer Rating

4.8/5 Stars

20830 REVIEWS

FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in

Model: G2S10TQ9LMA

FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in-

Downloads: datasheet manual

More FLOMEC Products

Ask an Expert

FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in

Model: G2S10TQ9LMA

This Stainless Steel 1in flowmeter comes with Tri-Clover sanitary fittings, the 09 Computer, and is calibrated to read litres per minute (LPM). Modular design allows for use with output modules sensors and remote transmitters.

This Stainless Steel 1in flowmeter comes with Tri-Clover sanitary fittings, the 09 Computer, and is calibrated to read litres per minute (LPM). Modular design allows for use with output modules sensors and remote transmitters.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

FLOMEC G2S10TQ9GMA 1" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 5-50 GPM (18.9-190 LPM)-

FLOMEC G2S10TQ9GMA 1" Tri-Clover Sanitary Turbine Stainless Steel Flowmeter, 5-50 GPM (18.9-190 LPM)

Model: G2S10TQ9GMA

This Stainless Steel 1 in. flowmeter comes with Tri-Clover® sanitary fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM).

Learn More

Recommended Accessories

FLOMEC 125066-500 Output Cable Kit, 100ft-

FLOMEC 125066-500 Output Cable Kit, 100ft

125066-500

FLOMEC 113272-500 Remote Cable Kit, 100ft-

FLOMEC 113272-500 Remote Cable Kit, 100ft

113272-500

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters-

FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters

125080-1

FLOMEC 11344001 510 Conversion Kit-

FLOMEC 11344001 510 Conversion Kit

11344001

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH-

FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH

113265-1

FLOMEC G2S10TQ9LMA Specifications

Design Type Turbine
Fitting 1-1/2in Tri-Clover
Flow Range 18.9 to 190 LPM
Frequency 47 to 470 Hz at 5 to 50 GPM
Recommended Strainer Size 55 mesh
Display LCD - 09 Computer
Reads Litres
Pressure Rating Limited by fitting size, clamp size & temperature
Click here for complete specifications on the FLOMEC G2S10TQ9LMA

What's included with the FLOMEC G2S10TQ9LMA

  • FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in
datasheet for the FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in manual for the FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in

Click on a category to view a selection of compatible accessories with the FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in.

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Ask a question about FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in

Customer Reviews for the FLOMEC G2S10TQ9LMA

FLOMEC G2S10TQ9LMA Specifications

Design Type Turbine
Fitting 1-1/2in Tri-Clover
Flow Range 18.9 to 190 LPM
Frequency 47 to 470 Hz at 5 to 50 GPM
Recommended Strainer Size 55 mesh
Display LCD - 09 Computer
Reads Litres
Pressure Rating Limited by fitting size, clamp size & temperature
Click here for complete specifications on the FLOMEC G2S10TQ9LMA
Show More...

What's included with the FLOMEC G2S10TQ9LMA

  • FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in
datasheet for the FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in manual for the FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in

Click on a category to view a selection of compatible accessories with the FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in.

FLOMEC 113275-10 FM-Approved Remote Assembly Kit for the A1/G2/TM/03 series 113275-10
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.



FLOMEC 125066-500 Output Cable Kit, 100ft 125066-500
Flomec output cable kit for use with conditioned signal output module, 4-20mA module and pulse access module.



FLOMEC 113272-500 Remote Cable Kit, 100ft 113272-500
Flomec remote cable kit for use with G2 Series Turbine Flowmeters. Features 2-Wires and Belden Shielded.



FLOMEC 113265-1 Standard Remote Assembly Kit for the A1 and G2 low-flow series, 1.5 kΩ, 700 mH 113265-1
Compatible with the A1 and G2 series of low-flow turbine flow meters, this remote kit allows for the flexibility of isolating the flow sensor from a panel-mounted digital indicator or a control device. In addition, safely and successfully measure high and low-temperature fluids.



FLOMEC 113437-01 Conduit Adapter Kit 113437-01
The Conduit Adapter allows you to enclose wiring from the magnetic pickup. The kit includes a turbine meter cover with a 1 in. male NPT conduit fitting and screws for plastic or metal installation.



FLOMEC 11344001 510 Conversion Kit 11344001
This new kit combines the Conduit Adapter with a magnetic pickup to allow easy installation of the 510 Series Displays or Transmitters to a G2 Meter.



FLOMEC 125080-1 Pulse Access Dust Cover for G2 Flowmeters 125080-1
Used with the Remote Kit, this part replaces the dust cover that houses the electronic display. This module provides a digital, open collector (NPN) output signal. Use this combination to communicate to a PLC or other piece of electronic equipment.



FLOMEC 901002-52 Computer O-Ring, G2 Series 901002-52
Spare O-Ring for your G2 series flowmeters.



FLOMEC 113435-10 Conditioned Signal Output Module 113435-10
Provides two digital signals: Open Collector or 6-volt Square Wave and can communicate with most process control devices. This kit can upgrade an existing FLOMEC meter or can be purchased with a new meter.



Ask a question about FLOMEC G2S10TQ9LMA Stainless Steel Tri-Clover Sanitary Flowmeter, 18.9-190 LPM, 1in

Customer Reviews for the FLOMEC G2S10TQ9LMA

More FLOMEC Products



  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal
  • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.