FLIR Si2-PD No WiFi Offers

Work with best-in-class decision support with this camera that features on-camera and software-based severity assessment of PD issues and PD type. In addition, this camera is ideal for enterprise scaling through fleet management functionality, helping managers ensure the tools are properly used and maintained.

Features

• Detect, locate, classify, and assess partial discharge (PD) faults from up to 656' (200 m) away
• Identify PD 30x smaller than ever before
• On-camera and software-based severity assessment of PD issues, and PD type classification provides best-in-class decision support
• One-handed operation with automatic tuning, 8x zoom, a 12 MP digital camera, and IP54 rating
• Made for enterprise scaling through the use of fleet management functionality so that managers can ensure the tools are being used and maintained properly
• Intuitive, light weight, one handed operation requiring minimal training
• On-device partial discharge type and severity analysis with recommended actions
• The highest performance acoustic imager available
• Provides a greater return on investment for ultrasound inspection because the ease of use does not require experienced, trained technicians to get meaningful results
• Market demand to expand inspections beyond finding compressed air leaks and high voltage, overhead component partial discharge
• MECH mode camera operation allows quick detection and measurement of bearing and other mechanical issues that can lead to costly production disruption or safety hazards (three metrics provided for mechanical fault measurement)
• Industrial gas quantification provides leak detection, leak rate and cost quantification for compressed air, methane, natural gas, ammonia, hydrogen, helium, and argon to find and prioritize repairs, and maximize return on investment
• Lights can make a big difference: This camera features dual LED lamps to illuminate nearby dark areas

On-camera PD severity assessment speeds up decisions

• PD severity assessment and PD indentification can be viewed both on-camera and in-software
• Severity assessment allows the user to see the importance of a PD issue without weeks of specialized training and months of experience

How to Update Your Si2 Camera

Applications

• Monitor transmission and distribution conductors and components at long distances easily and reduce need for emergency repairs

The Si1 and Si2-series cameras can be updated using Over The Air (OTA) update, or through USB. To update your camera through USB, please follow the instructions below. Make sure that you read all the steps before attempting the update.

• Inspect substation transformers to detect PD issues early, before they result in a dangerous and costly explosion
• Find PD issues in any piece of high-voltage equipment to reduce public complaints of radio interference and audible noise
• Power utilities
• Manufacturing
• Mining
• Aerospace
• Oil and gas
• Facility maintenance
• Research and development
• Reliability consultants
• Specialty service providers: Compressed air, refrigeration
• Electrical generation and transmission

Requirements:

• Ensure that the battery is fully charged. You will not receive any warning or message before starting the update
• To ensure a successful update installation, we recommend utilizing an unrestricted computer or workstation. This will help prevent any loss of information during the download or transfer process
• Use the USB flash drive supplied with the camera and make sure that the drive is empty.
• Disable the Wi-Fi on the device. Settings -> Network Settings -> Disable Wi-Fi

Instructions:

• 1. Insert the USB stick into the USB port and wait for a couple of seconds (an hourglass/waiting icon appears on the screen)

Please make sure that the internal Si2 memory does not contain any snapshot files, otherwise the USB update will not start.

*NOTE: DO NOT remove the USB stick until the camera instructs you to remove it, see image on step nr 4.

• 2. Wait until the following prompt message is displayed: "Update file detected. Apply? Yes or No", tap on Yes.
• 3. An status message is shown: "Please wait. copying update file...", the update is in process, please wait for 15 minutes.
• 4. Once the installation is completed, a confirmation message will appear: "Update copied. Remove the USB stick and restart the device to apply the update.", please tap OK
• 5. Now you can restart the camera. To restart the camera, first turn it off by long-pressing the power button until it turns red. Wait until it the Red LED light stops glowing, then turn it back on by short-pressing the button until it turns green.

Installation:

• 1. When turning on the camera, the device screen displays that the update is being installed
• 2. Wait until the installation is completed, this process takes around 10 minutes
• 3. The camera will display the FLIR logo, and then switch to the main screen (live view). The update has been now been installed successfully

*Note: If the mode selection at start up is enabled, the camera will display the mode selection screen first. Select a mode and then accept to be directed to the live view

Verification:

• 1. To confirm that your camera software is up-to-date, look at the text box at the bottom of the screen after pressing the settings menu. The device info displays the latest version of the software
• 2. The camera is ready for normal operation

If your camera currently has 25H1, follow the instructions in FLIR Customer Help – Option 1: Automatic Update Notification

If your camera has an older release than 25H1, follow the instructions in FLIR Customer Help – Step 2: Camera Update OTA