FLIR Si1-LD Offers

Find leaks faster and quantify their cost with on-device and software-based leak quantification, reducing electricity usage and improving equipment performance. Prioritize maintenance with powerful offline reporting in FLIR Thermal Studio Software Suite and online analysis via AcousticViewer to justify your inspection program.

With minimal training use, this advanced acoustic imaging camera features band-pass filtering for isolating unwanted ultrasound, it ensures precise detection of even smaller leaks at longer distances, helping you identify issues with accuracy and efficiency.

Features

• Automatically detects compressed air and vacuum leaks from up to 427 feet (130 meters) away
• Optimized processing of 96 microphones, ranging from audible to ultrasonic frequencies, enables the camera to triangulate the source of high-frequency leak sounds, as these sounds are directional
• Minimum Detectable Leak Rate (MDLR) as low as 0.01 L/min at a distance of 8' (2.5 m)
• Noise suppression technology ensures uninterrupted use in noisy industrial environments, improving accuracy and usability
• Band-pass filter enables manual tuning of the frequency range for precise inspections
• Lightweight design enables intuitive, single-handed operation, ideal for fast-paced inspections across large facilities
• Touch-screen interface captures high-resolution images with real-time quantifiable leak-rate and cost prediction for prioritizing repairs
• Over-the-air updates for ongoing updates and improvements
• Seamless reporting options, including online analysis via FLIR Acoustic Viewer and offline reporting with FLIR Thermal Studio software

Applications

• Leak detection in manufacturing and process industries
• Preventative maintenance and equipment optimization
• Energy efficiency and compliance
• Power utilities
• Manufacturing
• Mining
• Aerospace
• Oil and gas
• Facility maintenance
• Research and development
• Reliability consultants
• Specialty service providers: Compressed air, refrigeration

How to Update Your Si2 Camera

The Si1 and Si2-series cameras can be updated using Over The Air (OTA) update, or through USB. To update your camera through USB, please follow the instructions below. Make sure that you read all the steps before attempting the update.

Requirements:

• Ensure that the battery is fully charged. You will not receive any warning or message before starting the update
• To ensure a successful update installation, we recommend utilizing an unrestricted computer or workstation. This will help prevent any loss of information during the download or transfer process
• Use the USB flash drive supplied with the camera and make sure that the drive is empty.
• Disable the Wi-Fi on the device. Settings -> Network Settings -> Disable Wi-Fi

Instructions:

• 1. Insert the USB stick into the USB port and wait for a couple of seconds (an hourglass/waiting icon appears on the screen)

Please make sure that the internal Si2 memory does not contain any snapshot files, otherwise the USB update will not start.

*NOTE: DO NOT remove the USB stick until the camera instructs you to remove it, see image on step nr 4.

• 2. Wait until the following prompt message is displayed: "Update file detected. Apply? Yes or No", tap on Yes.
• 3. An status message is shown: "Please wait. copying update file...", the update is in process, please wait for 15 minutes.
• 4. Once the installation is completed, a confirmation message will appear: "Update copied. Remove the USB stick and restart the device to apply the update.", please tap OK
• 5. Now you can restart the camera. To restart the camera, first turn it off by long-pressing the power button until it turns red. Wait until it the Red LED light stops glowing, then turn it back on by short-pressing the button until it turns green.

Installation:

• 1. When turning on the camera, the device screen displays that the update is being installed
• 2. Wait until the installation is completed, this process takes around 10 minutes
• 3. The camera will display the FLIR logo, and then switch to the main screen (live view). The update has been now been installed successfully

*Note: If the mode selection at start up is enabled, the camera will display the mode selection screen first. Select a mode and then accept to be directed to the live view

Verification:

• 1. To confirm that your camera software is up-to-date, look at the text box at the bottom of the screen after pressing the settings menu. The device info displays the latest version of the software
• 2. The camera is ready for normal operation

If your camera currently has 25H1, follow the instructions in FLIR Customer Help – Option 1: Automatic Update Notification

If your camera has an older release than 25H1, follow the instructions in FLIR Customer Help – Step 2: Camera Update OTA