Customer Rating

4.8/5 Stars

21696 REVIEWS

FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

Model: CM174 | UPC: 793950371749

FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A-

Downloads: datasheet

More FLIR Products

Ask an Expert

FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

Model: CM174 | UPC: 793950371749

This clamp meter has a built in thermal imager allowing you to visually identify electrical problems you normally wouldn't see. It also has a narrow jaw and built-in worklight helping you access tight areas in dark spots.

This clamp meter has a built in thermal imager allowing you to visually identify electrical problems you normally wouldn't see. It also has a narrow jaw and built-in worklight helping you access tight areas in dark spots.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

FLIR CM276 IGM Clamp Meter and Thermal Imaging Camera with METERLiNK, 160 × 120, 600 A-

FLIR CM276 IGM Clamp Meter and Thermal Imaging Camera with METERLiNK, 160 × 120, 600 A

Model: CM276

Ideal for electrical inspection, troubleshooting, and diagnostic, this clamp meter combines the technology of thermal and visual cameras with Solar photovoltaic DC power measurements. Moreover, perform fast, safe, non-contact inspections with Infrared Guided Measurement (IGM) and built-in LED lights to illuminate dark areas.

Learn More

Recommended Accessories

FLIR TA74 Universal Flex Current Probe, 3000A, 18"-

FLIR TA74 Universal Flex Current Probe, 3000A, 18"

TA74

FLIR TA55 Line Splitter-

FLIR TA55 Line Splitter

TA55

FLIR TA80 Premium Silicone Test Leads-

FLIR TA80 Premium Silicone Test Leads

TA80

FLIR TA15 Universal Soft Sided Case-

FLIR TA15 Universal Soft Sided Case

TA15

FLIR CM174 Offers

Catch issues you probably would have missed without a visual image with the FLIR CM174 Clamp Meter. Check for hazards to make sure its safe enough to make contact and use the laser to help pinpoint the problem the thermal imager shows you. This device helps you find and solve electrical issues fast. It fits in your pocket and its narrow jaw and built-in worklight helps you access difficult locations with lighting issues. This new and faster way to see what you are clamping on to will help you troubleshoot problems and verify your repairs.

Features

  • Conquer cluttered wires and cables – IGM can quickly guide you in the right direction
  • All-in-one tool – carry just one device and always have access to thermal imaging
  • Work safely – scan a panel or cabinet for hazards using IGM without direct contact
  • Center-point temperature to confirm hot spot
  • Amperage and voltage measurements to check the load
  • Laser and crosshair pinpoint the location of the problem found in thermal image
  • Narrow jaw and built-in worklights help you access difficult locations with lighting issues
  • Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
  • Expandable to 3000 Amps AC with FLIR flex accessories

Applications

Ideal for the following applications: Electricians and Technicians, Plant Maintenance, HVAC, Preventative Maintenance, Automotive Industry, Check Loads and Verify Hot Spots

FLIR CM174 Specifications

Imaging Detector FLIR Lepton® microbolometer
Thermal Image Resolution 4800 pixels (60 × 80)
Field of View (V x H) 38.6° x 50.0°
Color Palettes Iron, Rainbow, Grayscale
Image Frame Rate 9Hz
Temperature Measurement Center point of thermal image
Temperature Distance to Spot Ratio 30:1
Spectral Response 8 to 14μm
Temperature Targeting Class 1 Laser Pointer and Crosshair on display
Emissivity Settings 4 Presets with Custom Adjustment
Display 6000 Count 2.0" (50mm) Color TFT
Jaw Opening 1.38" (35mm), 1250MCM
Category Rating CAT IV-600V, CAT III-1000V
Click here for complete specifications on the FLIR CM174

What's included with the FLIR CM174

  • CM174 Clamp Meter with Thermal Imager
  • 4 x AAA Batteries
  • Premium Silicone Test Leads
  • Quick Start
  • User Manual CD
  • Extended Warranty Registration Card

Introducing the FLIR CM174 Imaging Clamp Meter with IGM

Built-in Laser and Crosshair, See Hot Spots Immediately are just a few great features.

What is Infrared Guided Measurement (FLIR IGM™)?

FLIR CM174 True RMS AC/DC Clamp Meter: Overview


This video will serve as an overview of the clamp meter's key features. Additionally, this tool comes equipped with a built-in thermal imager, which enables the user to identify electrical problems.
datasheet for the FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

Click on a category to view a selection of compatible accessories with the FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A.

FLIR TA74 Universal Flex Current Probe, 3000A, 18" TA74
This current probe has a standard banana plug with a voltage signal output so you can connect it to most DMMs and clamp meters, regardless of brand to help you maneuver around tight spaces.



FLIR TA55 Line Splitter TA55
Provides easy and safe measurement of current and voltage from two or three wire outlets.



FLIR TA80 Premium Silicone Test Leads TA80
1000 Volt, 10 Amp Test Probes. Gold plated tips and high-strength stress relief integrated into the probe. 41" lead length with a total length of 46" including the probe.



FLIR TA70 Alligator Clips TA70
CAT IV/CAT III-1000V slide-on connection with finger guards.



FLIR TA15 Universal Soft Sided Case TA15
This universal, multi-compartment soft sided case is designed to protect and carry your FLIR clamp meter, test leads, flex clamp accessory, or any other tool you may need.



FLIR TA42 Belt Clip for the FLIR CM Series and DM284 TA42



Ask a question about FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

Customer Reviews for the FLIR CM174

FLIR CM174 Offers

Catch issues you probably would have missed without a visual image with the FLIR CM174 Clamp Meter. Check for hazards to make sure its safe enough to make contact and use the laser to help pinpoint the problem the thermal imager shows you. This device helps you find and solve electrical issues fast. It fits in your pocket and its narrow jaw and built-in worklight helps you access difficult locations with lighting issues. This new and faster way to see what you are clamping on to will help you troubleshoot problems and verify your repairs.

Features

  • Conquer cluttered wires and cables – IGM can quickly guide you in the right direction
  • All-in-one tool – carry just one device and always have access to thermal imaging
  • Work safely – scan a panel or cabinet for hazards using IGM without direct contact
  • Center-point temperature to confirm hot spot
  • Amperage and voltage measurements to check the load
  • Laser and crosshair pinpoint the location of the problem found in thermal image
  • Narrow jaw and built-in worklights help you access difficult locations with lighting issues
  • Advanced electrical features: True RMS, LoZ, VFD Mode, Inrush, Smart Diode with Disable
  • Expandable to 3000 Amps AC with FLIR flex accessories

Applications

Ideal for the following applications: Electricians and Technicians, Plant Maintenance, HVAC, Preventative Maintenance, Automotive Industry, Check Loads and Verify Hot Spots

Show More...

FLIR CM174 Specifications

Imaging Detector FLIR Lepton® microbolometer
Thermal Image Resolution 4800 pixels (60 × 80)
Field of View (V x H) 38.6° x 50.0°
Color Palettes Iron, Rainbow, Grayscale
Image Frame Rate 9Hz
Temperature Measurement Center point of thermal image
Temperature Distance to Spot Ratio 30:1
Spectral Response 8 to 14μm
Temperature Targeting Class 1 Laser Pointer and Crosshair on display
Emissivity Settings 4 Presets with Custom Adjustment
Display 6000 Count 2.0" (50mm) Color TFT
Jaw Opening 1.38" (35mm), 1250MCM
Category Rating CAT IV-600V, CAT III-1000V
Click here for complete specifications on the FLIR CM174

What's included with the FLIR CM174

  • CM174 Clamp Meter with Thermal Imager
  • 4 x AAA Batteries
  • Premium Silicone Test Leads
  • Quick Start
  • User Manual CD
  • Extended Warranty Registration Card

Introducing the FLIR CM174 Imaging Clamp Meter with IGM

Built-in Laser and Crosshair, See Hot Spots Immediately are just a few great features.

What is Infrared Guided Measurement (FLIR IGM™)?

FLIR CM174 True RMS AC/DC Clamp Meter: Overview


This video will serve as an overview of the clamp meter's key features. Additionally, this tool comes equipped with a built-in thermal imager, which enables the user to identify electrical problems.
datasheet for the FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

Click on a category to view a selection of compatible accessories with the FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A.

FLIR TA74 Universal Flex Current Probe, 3000A, 18" TA74
This current probe has a standard banana plug with a voltage signal output so you can connect it to most DMMs and clamp meters, regardless of brand to help you maneuver around tight spaces.



FLIR TA55 Line Splitter TA55
Provides easy and safe measurement of current and voltage from two or three wire outlets.



FLIR TA80 Premium Silicone Test Leads TA80
1000 Volt, 10 Amp Test Probes. Gold plated tips and high-strength stress relief integrated into the probe. 41" lead length with a total length of 46" including the probe.



FLIR TA70 Alligator Clips TA70
CAT IV/CAT III-1000V slide-on connection with finger guards.



FLIR TA15 Universal Soft Sided Case TA15
This universal, multi-compartment soft sided case is designed to protect and carry your FLIR clamp meter, test leads, flex clamp accessory, or any other tool you may need.



FLIR TA42 Belt Clip for the FLIR CM Series and DM284 TA42



Ask a question about FLIR CM174 True RMS AC/DC Clamp Meter with IGM, 600A

Customer Reviews for the FLIR CM174

More FLIR Products



  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal
  • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.