Extech TK430-IR Industrial Troubleshooting Kit with IR

Model: TK430-IR | UPC: 793950380444

Extech TK430-IR Industrial Troubleshooting Kit with IR

Model: TK430-IR | UPC: 793950380444

Ideal for electrical testing needs including installation and repair of electrical systems, HVAC/R equipment and large appliances.

Discontinued!

This product has been discontinued and is no longer available.

There is no direct replacement, however we recommend the:

Extech EX430A True RMS Autoranging Multimeter

Model: EX430A

True RMS, autoranging DMM with large digit LCD display and temperature function.

Learn More

Extech MA440 AC Clamp Meter/NCV Detector, 400A

Model: MA440

Pocket-sized meter is fully loaded with 9 multimeter functions and built-in, non-contact voltage (NCV) detector.

Learn More

Not what you're looking for? Let’s do a search and help you find what you need.

Recommended Accessories

Extech 480172 AC Line Splitter

480172

Extech TL803 General Purpose Test Leads

TL803

Extech TL810 Electrical Test Lead Kit

TL810

Extech TL809 Electronic Test Lead Kit

TL809

Extech TK430-IR Offers

Features:EX430 Multimeter

True RMS DMM with 11 functions and 0.3% basic accuracy
AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
Input fuse protection and mis-connection warning
20A max Current
Type K temperature measurements
Data hold, Relative, Auto power off
Large-digit backlit LCD

Features:MA200 Clamp Meter

2000 count LCD display
High accuracy for Current measurements
0.9" (23mm) jaw size accommodates conductors up to 300MCM
Continuity beeper and Diode test
Data Hold, Max Hold
Overload protection for all ranges
Overrange and low battery indicators
Autoranging with Auto Power Off

Features:40130 Voltage Detector

Non-Contact Detection of AC Voltage from 100VAC to 600VAC
For use on 50/60Hz circuits
Tip fits into outlets or against wire insulation
Flashing red LED light and push button ON/OFF Audible beeper indicator

Features:42510 Infrared Thermometer

Wide temperature range: -58 to 1000°F (-50 to 538°C)
Built-in laser pointer for easy targeting
Audible and visible overrange indicators
Large backlit LCD display
High resolution of 0.1° up to 199.9°
Fixed 0.95 emissivity covers 90% of surface applications
Automatic Data Hold when trigger released
Auto power off

Applications

Installation and Repair of Electrical Systems
HVAC/R
Large Appliances
Plant Maintenance
Electricians

Extech TK430-IR Specifications

Input Protection Limits
V	DC or V AC 600V DC/AC 200Vrms on 400mV range
mA	AC/DC 500mA 250V fast acting fuse
A	AC/DC 20A 250V fast acting fuse(30 seconds max every 15 minutes)
Temperature	60V DC/24V AC
General
Diode Test	Test current of 0.3mA maximum open circuit voltage 1.5V DC typical
Continuity Check	Audible signal will sound if the resistance is less than 150Ω (approx.) test current <0.7mA
Temperature Sensor	Requires type K thermocouple
Input Impedance	>7.5M Ω (VDC & VAC)
AC Response	True rms
ACV Bandwidth	50Hz to 1kHz
Display	4000 count backlit liquid crystal
Overrange indication	”OL” is displayed
Auto Power Off	15 minutes (approximately)
Polarity	Automatic (no indication for positive); Minus (-) sign for negative
Measurement Rate	2 times per second nominal
Low Battery Indication	” ” is displayed if battery voltage drops below operating voltage
Battery	One 9 volt (NEDA 1604) battery
Fuses	mA µA ranges; 0.5A/250V fast blow A range; 20A/250V ceramic fast blow
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F(40°C)
Storage Humidity	<80%
Operating Altitude	7000ft. (2000meters) maximum.
Weight	0.753lb (342g) (includes holster).
Size	7.36” x 3.2” x 2.0” (187 x 81 x 50mm) (includes holster)
Safety	For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (1995) EN61010-1 (1995) Overvoltage Category III Pollution Degree 2.

What's included with the Extech TK430-IR

EX430: True RMS autoranging multimeter with 11 functions
MA200 : 400A Clamp meter with basic AC Current and 1mA resolution
40130 : Non-contact voltage detector (from 100V to 600V AC)
42510: Infrared Thermometer
Storage Case

Click on a category to view a selection of compatible accessories with the Extech TK430-IR Industrial Troubleshooting Kit with IR.

Extech 480172 AC Line Splitter 480172

Allows clamp meter to measure AC Current on a 2-wire or 3-wire power cord.

Extech TP873 Bead Wire Type K Temperature Probe, -30 to 300° TP873

Type K temperature probe with mini connector and banana plug adaptor.

Extech TL803 General Purpose Test Leads TL803

The Extech TL803 Standard Test Leads have protective tip covers for safety during storage. Standard replacement test leads with shrouded banana connectors and molded strain reliefs. Compatible with most multimeters. The Extech TL803 Standard Test Leads have a 10A capacity and are rated at CAT III-1000V and are UL Listed.

Extech TL841 Test Lead Kit TL841

16-piece kit with multiple test lead tip configuration.

Ask a question about Extech TK430-IR Industrial Troubleshooting Kit with IR

Customer Reviews for the Extech TK430-IR

Description ➕➖