- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
For use with general-purpose melt pressure measurements, this melt pressure sensor works with DCS and PLCs and provides the industry standard 0 to 10 Vdc amplified signal. Come with a snout length of 6" (15 cm).
For use with general-purpose melt pressure measurements, this melt pressure sensor works with DCS and PLCs and provides the industry standard 0 to 10 Vdc amplified signal. Come with a snout length of 6" (15 cm).
General purpose melt pressure transducer provides the industry standard 3.33 mV/V signal compatible with most pressure indicators. Designed to be widely acceptable by OEMs and users anywhere in the world.
Features
| Output | 3.33 mV/V ±2.0% |
| Input Voltage | 10 vdc recommended, 12 vdc maximum |
| Combined Error | ±1.0% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2%FSO |
| Configuration | Four-arm bonded foil Wheatstone bridge strain gage |
| Bridge Resistance | Input & Output: 345 Ohms minimum |
| Over Pressure | 2 X FSO |
| Zero Balance | ±10% FSO |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1% |
| Insulation Resistance | 1000 megohms @ 50 Vdc |
| Output | 3.33 mV/V ±2.0% |
| Input Voltage | 10 vdc recommended, 12 vdc maximum |
| Combined Error | ±1.0% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | ±0.2%FSO |
| Configuration | Four-arm bonded foil Wheatstone bridge strain gage |
| Bridge Resistance | Input & Output: 345 Ohms minimum |
| Over Pressure | 2 X FSO |
| Zero Balance | ±10% FSO |
| Internal Shunt Calibration (R-Cal) | 80% FSO ±1% |
| Insulation Resistance | 1000 megohms @ 50 Vdc |
